Go Back   The > Trade Associates > Remap 180

Thread Tools Search this Thread Display Modes
Old 13-11-2010, 12:30
Remap180 Remap180 is offline
Join Date: Nov 2009
Location: Four Ashes, Wolverhampton
Posts: 613
Send a message via Skype™ to Remap180
Default Mazda 3 1.6 2005-2010 Diesel Particulate Filter DPF replacement or removal

Mazda 3 1.6 Diesel 2005-2010 Particulate Filter replacement or removal

Diesel Particulate Filter Problems

If you are having an issue with your diesel particulate filter (DPF) you are not alone, there are thousands of people all over the UK that are facing hefty dealer bills to replace DPF’s that cannot be regenerated by main dealers.

The cost of DPF replacements is very high, with some customers reporting total replacement costs of upto 2000 or more…

Rapid Remap can offer a viable alternative of complete DPF system removal or replacement at less than 50% of main dealer prices in most cases.

Obviously complete removal offers a final solution, whereas replacement DPF comes with a 12 months manufacturer warranty.

We offer a full in house solution which ever option you choose, contact us today for a chat about your particular requirement.

A diesel particulate filter sometimes referred to as a DPF removes the diesel particulate matter (or soot) from the exhaust gas of a diesel vehicle, therefore reducing particulate emissions.

Why Do Cars Have DPF's?

With changes to the car emissions legislation, the 'Euro 5' standards will make diesel particulate filters a commonplace in diesel car exhausts as catalytic converters are in petrol cars.

How Does a Diesel Particulate Work or DPF Work?

Unlike a Catalytic Converter a DPF is not a flow through device, and works by forcing the gasses to flow through the filter. As the channels of the filter are blocked at alternate ends, the gasses are forced to flow through the cell walls in order to exit the filter. As the cell walls are porous, the gasses are allowed to pass through, but the particulate matter is deposited on the cell walls. This ensures that only the clean exhaust gasses can exit, and the particulate matter is trapped in the filter.

Passive Regeneration

Passive regeneration takes place automatically on motorway-type runs when the exhaust temperature is high. Many cars don't get this sort of use though so manufacturers have to design-in 'active' regeneration where the engine management computer (ECU) takes control of the process.

Active Regeneration

Active Regeneration occurs when the level of soot in the filter reaches around 45%. The ECU makes small adjustments to the fuel injection timing and increases the exhaust gas temperature. This increases the exhaust temperature which then initiates the regeneration process, burning away the soot trapped in the DPF.

What cars do you have DPF's for?

We currently stock DPF's for the above vehicles; however our parts catalogue is always growing so make sure you contact us if you need a diesel particulate filter.

What Does a Diesel Particulate Filter Do?

The latest diesel engines have a diesel particulate filter (DPF) and a reactivating unit. The DPF collects particulates such as black smoke, soot, HC, etc, which are found in the exhaust gas. The recovery unit is further upstream than the DPF in order to maintain the function of the DPF.

The recovery unit has an oxidation catalyst. The NO and O2 in exhaust gas react with each other, and NO2 is generated. The generated NO2 reacts with the particulates. As a result, the particulates collected in the filter are eliminated, and the DPF is recovered.

The particulates react with O2 at a temperature of approx 550 C. or more, and react with NO2 at a temperature of approx 250 C. or more.

When a vehicle is driven at a low continuous revs on a regular basis, the temperature of exhaust gas is maintained at approx 250 C.

Even given this type of use, provided that NO2 is supplied by the recovering unit, the DPF can achieve continuous recovering state in which particulates are burnt while collecting the particulates.

However, if light load operation continues, the temperature of the exhaust gas falls. As a result, it is difficult to maintain the temperature of the oxidation catalyst further up system than the DPF, so there are situations in which recovery of the DPF is insufficient.

If the continuous recovering function deteriorates, the DPF is in an over-collected state, and clogging by particulates occurs. As a direct result, an exhaust gas pressure increases, and the fuel efficiency and the power performance of the engine will deteriorate.

Visit website for more details

Last edited by Remap180; 15-11-2010 at 10:20.
Reply With Quote

diesel particulate filter, dpf, free winter check, performance centre, rapid remap cannock

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 08:35.

The ChipGods 2009 - VBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.