Speed Pulse data for fitting Taxi Meters etc

[mark]

Manufacturer Model Start End Speed signal pickup Speed wire colour Comments
Alfa Romeo 145 1994 "Behind the instrument cluste, on the white 14 pin connector pin No 11 Light Blue" Light Blue
Alfa Romeo 145 1994 1997 Light blue behind the control unit on the white 14 pin connector Pin 11. Light Blue
Alfa Romeo 145 "Behind Instrument cluster on green connector, the speed signal is on Pin 2 wire colour is Blue/Red" Blue/Red
Alfa Romeo 145 1.6 1994 1997 "The white, 14 pin connector with the speed pulse signal at pin 11, is behind the instrument panel." Light blue.
Alfa Romeo 147 2001 "The position of the speed signal depends on the production date of the vehicle.
1/The speed signal is on the black connector on the ABC ECU, in the front near side of the Engine bay. The signal is on Pin 37 wire colour is Green/White.
2/ The speed signal is on the Fuse-box, on the blue connector pin 7 wire colour is Green/White." Green/White
Alfa Romeo 155 1992 1997 "Behind the instrumnet cluster on the 5 pin connector, pin number 4 Brown wire." Brown
Alfa Romeo 155 1992 1996 "Brown, on the control panel on th 5 pin connector Pin 4." Brown
Alfa Romeo 155 Twin Spark 1.8 1992 1993 "The white, 5 pin connector with the speed pulse signal at pin 4, is behind the instrument panel." Sky blue.
Alfa Romeo 156 1990 "behind the instrument cluster black 16 pin connector, pin 11, green wire."
Alfa Romeo 156 2.4 JTD 1997 "Under the radio housing, in the harness connected at the climate control. The light green wire carries the speed pulse signal at a black 12 pin connector." Light Green
Alfa Romeo 156 Coupe 1997 "Behind the instrument cluster on the 16 Pin connector, on pin number 11 green wire." Green
Alfa Romeo 164 (2.0) Super T.S. 1993 1997 "The green, 12 pin connector with the speed pulse signal at pin 2, is behind the instrument panel." Grey. "All models are the same. There are two grey cables in the green connector, the larger has the speed pulse signal."
Alfa Romeo 164 3.0 V6 1988 1993 Behind the instrument panel is a 10 pin connector. The signal is at pin 4. Grey.
Alfa Romeo 164 V6 Sprinter 1993 "Behind the instrumnet cluster on the 12 pin connector, on pin number 3 Grey wire." Grey
Alfa Romeo 166 1999 "Behind Instrument cluster on the blue plug, the wire colour is Brown/Black" Brown/Black
Alfa Romeo 166 1998 "1.Behind instrument cluster, Blue plug Brown/Black. 2 behind the radio, there is the ICS module. The white 14 pin connector carries the signal at pin b4. Cable colour is grey/black (?). Maybe also at ISO radio connector, 8 pin connector at pin 1." "Brown/Black,or Grey/black?"
Alfa Romeo 166 1998 "You can find a ""Navigator System M90 connector"" in the boot. There is a 26 pin Siemens connector. Pin B carries the signal."
Alfa Romeo 33 1994 "At the rear of the instrument cluster at the circuit board, there is a 3 pin connector. The cable colours are yellow, black and green. The green one carries the signal." Green.
Alfa Romeo 33 1988 1990 The special metal strap behind the instrument panel may have a yellow wire connected. Yellow.
Alfa Romeo GTV 1995 "Behind the instrumnet cluster on the green connector, on pin number 7 light blue wire." Light blue wire.
Alfa Romeo Spider Twin Spark 2.0 16V 1995 1998 "Behind the instrumnet cluster on the green connector, on pin number 7 light blue wire." Light Blue
Alfa Romeo Spider/GTV 1995 "Light Blue, behind the control unit on the green 18 pin connectorPin 7" Light Blue
AMC General Hummer "Down righthand side at speedometer. Connection ""send""."
AMC General Hummer 6.5 D 1994 Yellow cable at speedometer Yellow.
AMG (Mercedes) AMG E55 1999 "See Mercedes E-Class, Mod. 99" Green/white.
Aston Martin DB7 2001 "Under the passnger or Drivers seat, pin 58 blue wire on ECU or under L.H. trim in boot on 4 pin connector blue wire. YOU MUST USE AN SMM102 from Sailes Marketing."
Aston Martin Virage Vilante 1995 "between rear seats remove small panel to gain access to the handbrake adjustment cables. You will see a black 3 wire connector, blue wire has the signal."
Audi 100 Avant 1991 1994 "Green connector T6/c at the main connection unit number 2, behind the cover in the door post, in the driver side kickwell." White/blue. The cable colour of all models from this manufacturer is white/blue. If radio connector (ISO) is available please use pin 1 in chamber 3.
Audi 80 2.6 E 1992 1995 Black connector T10 at the optional relays carrier under the steering column. The connecting place is variable! White/blue. The cable colour of all models from this manufacturer is white/blue. If radio connector (ISO) is available please use pin 1 in chamber 3.
Audi 80 Avant 1992 1996 Black connector T10 at the add-on relays carrier under the steering column. The connecting place can change in the carrier. White/blue. The cable colour of all models from this manufacturer is white/blue. If radio connector (ISO) is available please use pin 1 in chamber 3.
Audi 80 Cabrio 1991 "The speed signal is on the back of the radio, on the ISO block connector ""A"" pin number 1 Blue/white wire." Blue/White
Audi A3 1.6 l 1999 Remove cover between steering wheel column and instrument cluster. At the right backside of the instrument cluster (facing the engine) there is a green 32 pin connector. The green/white cable at pin 30 carries the signal. Green/white. Normally Audi uses the cable colour white/blue. If radio connector (ISO) is available please use Pin 1 in chamber 3
Audi A3 1.8 i 1996 "Under the instrument panel, on the left hand side of the steering column is a white, 10 pin connector. The signal is at pin 2." White/blue. The cable colour of all models from this manufacturer is white/blue. If radio connector (ISO) is available please use pin 1 in chamber 3.
Audi A3 Mod. 2000 1999 "At the rear of the instrument cluster, there is a blue 32 pin connector. Pin 28 carries the signal." Green If radio connector (ISO) is available please use Pin 1 in chamber 3
Audi A4 1994 1998 "Brown connector T10/9 at the main connection E-Box (top of bulkhead) in the engine compartment, at the passenger side, at the passage to the passenger kickwell under the windscreen. The pin with the white/blue cable carries the signal." White/blue. The cable colour of all models from this manufacturer is white/blue. If radio connector (ISO) is available please use pin 1 in chamber 3.
Audi A4 1.6 1999 "In the engine compartment, in the corner at driver's side, near windscreen, there is the black E-box. Open the box, remove the ECU. The brown 10 pin connector (second one from left side - facing the engine) carries the signal at pin 9." White/blue. If radio connector (ISO) is available please use Pin 1 in chamber 3
Audi A4 2.5 TDI Quattro 1999 "In the engine compartment, driver's side, near the windscreen, there is a black box. In this box you can find a black 10 pin connector. Pin #10 carries the signal." Brown/red. If radio connector (ISO) is available please use Pin 1 in chamber 3
Audi A6 1995 1996 "Green connector T6/c at the main connection block, at the driver door post, behind the cover." White/blue. The cable colour of all models from this manufacturer is white/blue. If radio connector (ISO) is available please use pin 1 in chamber 3.
Audi A6 2.5 TDI Mod. 1999 & 2000 1997 There is a black 10 pin connector at the control unit in the engine compartment. Pin 10 carries the signal. Brown/red.
Audi A6 Model 97 1997 Behind the cover at the drivers door post is a main connection block. The signal is in the pink connector. White/blue. The cable colour of all models from this manufacturer is white/blue. If radio connector (ISO) is available please use pin 1 in chamber 3.
Audi A6 Model 98 1998 Footwell of front-seat passenger. There is a pink 8-pin connector. Pin 2 carries the signal. White/blue. Caution: A connection at speedometer would destroy the hall-generator. Export models have a black box in the engine compartment. Cable colour is brown/red
Audi A8 1994 1996 "Black radio connector at the radio (ISO: Chamber 3.) in the centre console. In addition the signal is available at pin 2 of a loose, black 4 pin connector, located in the front passenger kickwell, at the main connection unit." White/blue. "The cable colour of all models from this manufacturer is white/blue. Note: the GPS antenna must be installed outside the car, because the windows have a metallic coating. If there is a problem with the speed pulse, change the speed pulse filter from high"
Audi Cabriolet 2.6 1997 Black connector T10 at the optional relays carrier under the steering column. The connecting place is variable! White/blue. The cable colour of all models from this manufacturer is white/blue. I radio connector (ISO) is available please use pin 1 in chamber 3.
Audi S2 (80Coupé/90Coupé) 1999 ISO-Radio connector pin 1 of chamber 3. ? "Limited edition, Chassis of Audi 80 Coupé or Audi 90 Coupé."
Audi S3 1.8 T Quattro 1999 "At the rear of the instrument cluster, there are green, grey and blue connectors. The blue 32 pin connector has the signal at the white/blue cable. (maybe pin 30?) OR: At the gearbox there is a 3 pin connector, Cable colours are: brown - ground, black/brown." White/blue. If radio connector (ISO) is available please use Pin 1 in chamber 3. Please see Audi A3.
Audi S4 Model 97 1997 "Brown connector T10/9 at the main connection E-Box (top of bulkhead) in the engine compartment, at the passenger side, at the passage to the passenger kickwell under the windscreen." White/blue. Same location as at Audi A4.
Audi S4 Model 98 1998 "Brown connector T10/9 at the main connection E-Box (top of bulkhead) in the engine compartment, at the passenger side, at the passage to the passenger kickwell under the windscreen." Brown/red. Same location as at Audi A4.
Audi TT Coupe 1.8 T Quattro 1998 "Remove vertical cover on the lefthand side of instrument panel. Remove cover under instrument cluster. Loosen 2 screws and tip instrument cluster forward. At the rear there is a blue 32 pin connector, pin 31 is the outgoing signal, cable colour blue/white" See description. Rear of radio pin 1 Green/white
Bentley Azure Mod.98 "In the glove box, leftside, below a black lid, there is a round, 49 pin connector. Pin ""x"" carries the signal." Red/yellow.
Bentley Mulsanne Turbo 1984 1984 "The speed pulse is in the kick panel at the bottom of the ""A"" post, there is a multi pin connector. The colour is red/green." Red/green.
BMW """7"" Series" At the left rear light there is a black 6-pin connector. Pin 1 carries the speedpulse signal of the left wheel. Pin 2 carries the speedpulse signal of the right wheel. Yellow/white..
BMW """8"" Series" 1991 All types of this series have a radio with Speed Related Volume Control (GAL)-function pre installed by the manufacturer. The radio is installed in the centre console or in the boot at the passenger side near the wheel housing. Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 3 Series "Black/white, on the radio connector" Black/White
BMW 316 1991 1997 "In all models of this series, there is a distribution box in the driver side kickwell at the door post. The location of the black connector with the speed pulse signal can change within the box. May also be at pin 1 of ISO radio connector." Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 318i 1998 "Behind the instrument cluster is a black, 26 pin connector. At pin 8 is the signal. Caution: Never pull off a connector from the instrument cluster or aircon module. The engine wouldn't start again. May also be at pin 1 of the ISO radio c" Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 320i Touring 1991 1997 "In all models of this series, there is a distribution box in the driver side, by the door post. The location of the black connector with the speed pulse signal can change within the box. May also be at pin 1 of ISO radio connector" Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 328i 1995 At the radio connector. Black/white.
BMW 328i Touring 1991 1997 "In all models of this series, there is a distribution box in the driver side kickwell at the door post. The location of the black connector with the speed pulse signal can change within the box. May also be at pin 1 of ISO radio connector." Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 3-Series 1985 1994 The speed pulse comes from the rear differrential to the instrument cluster. There are two wires a Brown and a Brown/red at pins 8 and 12 of the green or white connector going into the cluster.we believe that the speed pulse is on the Brown/red wire howev Brown/red.
BMW 518 1991 1995 "Under the rear seat squab, on the driver side there is a black, 8 pin connector at the control unit. This connector may be fixed at the control unit on the side to the boot, or laid loose in this area. May also be at pin 1 of ISO radio connector." Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 518i 1991 1995 "Under the rear seat squab, on the driver side there is a black, 8 pin connector at the control unit. This connector may be fixed at the control unit on the side to the boot, or it is laid loose in this area. May also be at pin 1 of ISO radio connector." Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 520i 1991 1995 "Under the rear seat squab, on the driver side there is a black, 8 pin connector at the control unit. This connector may be fixed at the control unit on the side to the boot, or laid loose in this area. May also be at pin 1 of ISO radio connector." Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 520i A (E39) 1996 "Under the glove box is a black, 26 pin connector at the control unit. The signal is at the black/white cable. May also be at pin 1 of the ISO radio connector." Black/white. The cable colour of all models from this manufacturer is black/white. If radio connector is available please use the black/white cable there.
BMW 525i 24V 1990 1995 "Under the rear seat squab, on the driver side there is a black, 8 pin connector at the control unit. This connector may be fixed at the control unit on the side to the boot, or laid loose in this area. May also be at pin 1 of ISO radio connector." Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 530D Touring (E39/2) Mod. 10/99 1998 "High version: Behind the instrument cluster you can find the IKE-module. The blue connector carries the signal at pin 1. OR: Low version: NO IKE-Module. There is a white connector (S2), pin 19 carries the signal, cable colour is brown/red." IKE-Module: flat instrument group at the rear of the instrument cluster.
BMW 530i 1991 1995 "Under the rear seat squab, on the driver side there is a black, 8 pin connector at the control unit. This connector may be fixed at the control unit on the side to the boot, or laid loose in this area. May also be at pin 1 of ISO radio connector." Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 728i 2001 "The speed signal can be found next to the rear near side light cluster, on a black connector wire colour is Black/White" Black/White
BMW 728i 1991 All models of this series have a radio with Speed Related Volume Control (GAL) function pre-installed by the manufacturer. The radio is installed in the centre console or in the boot at the passenger side near the wheel housing. Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 730i 1991 1996 All types of this series have a radio with Speed Related Volume Control (GAL)-function pre installed by the manufacturer. The radio is installed in the centre console or in the boot at the passenger side near the wheel housing. Black/white. The cable colour of all models from this manufacturer is black/white.
BMW 735i (E38) 1998 "I the boot, leftside, between rear light and wheel housing, at the very outside, there is the radio with a 17 pin connector. Pin 10 carries the signal." Black/white. "Bad signal, but usable."
BMW E46 1999 In the boot on the multi connector Black/white.
BMW X5 2001 "On the back of the Radio on Pin No. 4, wire colour is Black/White" Black/White
BMW Z3 1996 1998 All types of this series have a radio with Speed Related Volume Control (GAL)-function pre installed by the manufacturer. The radio is installed in the centre console. Black/white. The cable colour of all models from this manufacturer is black/white.
Cadillac Sedan De-Ville 1988 1988 "Under the instrument panel, near the steering column, is a brown/white wire. The speed pulse is available here." Brown/white.
Cadillac Seville Northstar 32V 1998 "Green/white, on the control panel on the green 16 pin connector. Pin A6" Green/White
Chevrolet 4X4 2000 The speed signal is on the white multiple connector above the accelerator pedal. The wire colour is Dark blue/Green Dark Blue/Green
Chevrolet Blazer S10 1993 1995 On the digital ratio adapter controller on the 9 pin connector Pin 1.
Chevrolet Cavalier 1995 Behind the instrument cluster. Green/white
Chevrolet Corvette 1998 "Green/white, on the control panel on the connector A Pin 7" Green/White
Chevrolet Corvette Mod.95 1995 Behind the radio. Light-brown. The wire colour was taken from the radio side of the connector. The colour for the opposite side of the connector is green/white.
Chevrolet Corvette Mod.98 1998 Behind the speedometer pin 7. Green/white.
Chevrolet Explorer Van Astro Van "At the bonnet lock, below the cover of a water pipe there is the cruise control ECU. The yellow cable carries the signal." Yellow.
Chevrolet GM200 1997 There are 2 dark green cables in the original connector of the radio (20 pin). One of these cables carries the signal. Dark green.
Chevrolet Suburban 1996 1997 "At the Cruise Control Module on the left side of the brakefluid reservoir on the right side in the motor compartment, there is a 10 pin Connector, pin K carries the signal." Dark green/white Signal can be found at radio connector too. Cable: dark green/white
Chevrolet Suburban 1991 1992 At the ECM above blower motor pin A10 or B11 Brown.
Chevrolet Trans Sport 1997 Green. On the 20 pin radio connector On the grey part. Pin 16. Green The GPS antenna can be fitted under the front dashboard.
Chevrolet Trans Sport Mod. 99 1997 There are 3 connectors with 24 pins under the fuse box. The center one carries the signal at position E8. Dark green.
Chevrolet Van 1991 Under the driver seat there is an engine control unit. There are two connectors. The signal is at the black 24 pin connector. Use the pin connected to a brown wire. Brown.
Chrysler 300M 1998 White/orange. In the engine box under the low pressure box on the control unit on the 66 pin connector Pin 66 White.orange
Chrysler 300M 3.5 1998 The white/orange cable between Computer/Gearbox-control (Description 58) and Computer/Engine-control (Description C2/66) carries the signal. White/orange.
Chrysler Cherokee 1991 1999 "The speed pulse is at pin 5 of the upper of two grey 10 pin connectors, within the engine compartment, on the passenger side, at the bulkhead." White/orange. The cable colour of all models from this manufacturer is white/orange.
Chrysler Cherokee 3 litre petrol MY2002 2002 See comments Light Green/Yellow "Remove dash panel and on drivers side you will see a large wiring loom running along the dash brace. Remove outer tape covering to locate wire. Also required is a 4 way speed signal unit to cleean the signal, Siemens VDO part no. 60770400."
Chrysler Cherokee 4.0 1991 1993 "In this model, the speed pulse is at pin 47 of the black 60 pin connector to the engine control unit, located in the engine compartment, above the bumper, on the passenger side." White/orange. The cable colour of all models from this manufacturer is white/orange.
Chrysler Cherokee TD 2.5 1991 1997 "In this model the signal can be found in the engine compartment, on the left (looking from the front), in a black 60 pin connector at pin 47." White/orange. The cable colour of all models from this manufacturer is white/orange.
Chrysler Grand Cherokee 1998 "At the speedometer, there is a 12 pin connetor. Pull out the connector and look at the contacts: upper row, 2nd cable from right carries the signal" White/orange.
Chrysler Grand Cherokee 1998 "The speed pulse can be found at the left hand side of the engine compartment. At the ABS module, pin 3, white/orange wire." White/orange. Please note: The same colour wire can also be found at the gearbox sender unit. DO NOT USE THIS WIRE!!! When the vehicle is placed in reverse the vehicle judders. Connect only at the ABS module.
Chrysler Grand Cherokee 1997 "Under the car, in the middle, on the driver side, at the gear box is a black 3 pin connector. The outside pin with the white/orange cable has the signal." White/orange. "Don't take the Signal from speedometer!!!
Alternative location: At the cruise control, down in the left hand side footwell area at the bulkhead. Same Cable colour. Caution: this cable-colour is also used for 12V."
Chrysler Grand Cherokee 1998 1998 A white/orange cable at the gearbox and at ECM carries the signal. White/orange. Also possible cables at gearbox: black/bright blue and white/purple.
Chrysler Grand Cherokee 4.7 Mod. 2000 1999 There is a white 10 pin connector at the backside of the instrument cluster. The white/orange cable carries the signal. White/orange.
Chrysler Grand Voyager 1995 "There are two black connectors to the engine control unit in the engine compartment, above the wheel housing (drivers side). The lower 30 pin connector, has the signal at pin 66." White/orange. The cable colour of all models from this manufacturer is white/orange.
Chrysler Grand Voyager 1991 1995 "In this series, a black connector with the speed pulse at pin 47 is located in the engine compartment next to the battery." White/orange. The cable colour of all models from this manufacturer is white/orange.
Chrysler Grand Voyager 2.5TD 2001 "Chrysler Grand Voyager 2.5D Limited Edition Model Year 2001, there is as 3 pin plug on top of the differential and the colour is blue/orange." Blue/Orange
Chrysler Grand Voyager LE 3.3l 1996 White/orange. In the engine box on the 60 pin connector Pin 47. White/orange
Chrysler Grand Voyager LE Diesel GS 1996 White/orange. In the engine box on the grey 10 pin connector White/orange
Chrysler Grand Voyager LE GS 3.8l 1996 White/orange. On the ECU on the black 40 pin connector Pin 66 White/orange
Chrysler Jeep Cherokee Xj 2.5l TD 1995 1997 Green/black. On the digital ratio adapter controller on the 9 pin connector Pin 1 Green/Black
Chrysler Jeep Grand Cherokee Z 5.2l V8 1996 White/orange. On the ECU on the passenger's side. White/orange Noisy speed pulse signal so we recommend you fit an attenuator on the speed pulse. Available free from VDO technical on 0121 344 5400
Chrysler Jeep Wrangler 1994 White/pink. Behind the control panel on the white connector. Pin 3 White/Pink The speed signal should not connect to the gearbox sensor. The speed signal could be overlayed by the ignition signal.
Chrysler Neon 1995 1999 "In this model the signal is at pin 12 of a black connector, located between the engine compartment and the occupant cell on the driver side." White/orange The cable colour of all models from this manufacturer is white/orange.
Chrysler Neon PL 1995 "White/orange. In the engine box, driver's side between engine and firewall on the black connector Pin 12" White/orange
Chrysler New Yorker 1998 White/orange. In the engine box on the engine control unit on the 60 pin connector Pin 58. White/orange The car battery has to be removed in order to disconnect the connector of the engine control unit
Chrysler PT Cruiser 2000 On the gear box on the black 3 pin connector. The White/Orange wire. White/Orange
Chrysler PT Cruiser 2000 "Turn steering wheel to RH full lock. In LH wheelarch there is a bundel of wires. Behind that is a removable grey cap covering a sensor in the transmission casing. There are 2 green wires, the signal is slightly noisy so a filter is required."
Chrysler Stratus 1991 1996 "In this model, a black, two part, 30 pin connector is located in the engine compartment, right (viewed from the front) and in front of the engine block. Pin 66 of the first part (closer to the radiator grill) has the speed pulse." White/orange The cable colour of all models from this manufacturer is white/orange.
Chrysler Stratus JA 1995 White/orange. In the engine box on the ECU on the black 66 pin connect. Pin 30. White/orange
Chrysler Vision 1994 1997 The speed pulse is at pin 47 of the black 60 pin connector to the engine control unit. It is located in the engine compartment on the driver side under the air filter. White/orange The cable colour of all models from this manufacturer is white/orange.
Chrysler "Voyager LX, Mod.98/99" 1998 "Look into the engine compartment, and on the right hand side, next to the battery or on opposite left side too, you can find the gearboxcontrol computer (description 58). The white/orange cable, carries the signal. This cable goes to the engine control co" White/orange.
Chrysler Voyager TD 1995 "Three connectors are located above each other, at the front passenger side, at the bulkhead. The grey 10 pin connector (bottom one) has the signal at pin 4." White/orange The cable colour of all models from this manufacturer is white/orange.
Chrysler Voyager V6 2001 "Turn steering wheel to RH full lock. In LH wheelarch there is a bundel of wires. Behind that is a removable grey cap covering a sensor in the transmission casing. There are 2 green wires, the signal is slightly noisy so a filter is required."
Citroen Berlingo Hdi 2000 O/S footwell behind fusebox there is a yellow 26 way connector at the BCI / BSI ? Signal is on Pin 2. Blue ?
Citroen C5 MY2003 2 leads near the fuse box - they have 9000 written on them. Grey / White
Citroën AX
Citroën Berlingo 1996 Green. Behind the speedometer on the blue connector. Pin 2. Green
Citroën Berlingo 600 1996 "At the instrument panel, behind the speedometer, is a blue connector. Pin 2 has the signal." Green. The number on the cable is 465.
Citroën Boxer Refer to Peugeot Expert
Citroën BX TRS & GTI "The SP-generator is located directly at the gearbox. There is a 3 pin connector. One of these 3 pins carries the signal (one power supply, one ground)" Unknown "For other models (e.g. TRD 91), the Citroen speed pulse generator part No. 96 046 743 is required. To be fitted at the gear box side."
Citroën C5 2001 "Behind the glove Box is the IC01 Connector, The speed signal is on pin 1 and the wire has the number 6739 or 6739 written on it.
This signal can also be found in the engine bay, at the ABS ECU on pin 39 and is numbered 6739C." 6739 FleetLogger installation requires a CAN Bus interface to be installed. Interface type CB4T must be installed in the engine bay near the ECU following packing note instructions.
Citroën Dispatch 2001 Behind instrument cluster on the 9 way green connector at pin No.1 wire number 162 No.162
Citroën Dispatch 1.9 TD 2001 Behind the instrument cluster on the 9 way green connector at pin 1 wire number 1622 No 1622
Citroën Evasion 1994 Green. On the control panel on the green 9 pin connector Pin 1. Green
Citroën Evasion 1994 1998 "The green, 9 pin connector with the speed pulse signal at pin 1, is behind the instrument panel close to the speedometer." Green.
Citroën Jumper 1999 "If this vehicle is equiped with a tachograph, it has a speedpulse signal. You can find the signal at the gearbox. Vehicles without tachograph can be retro fitted with a hall generator from Citroen." Yellow?
Citroën Saxo 1996 Pink/green. Under the steering wheel on the 7 pin connector Pin 2. Pink/Green Speed signal alternative: In the engine box on the ECU on the 55 pin connector Pin 28 cable colour: pink/green.
Citroën Saxo 1.1i 1996 1998 "In the engine compartment there is an electronic box on the right hand side of the engine. There is a black, 55 pin connector and the signal is at pin 28." Rose/green. There are 2 wires on the same terminal: rose (1360) and green (465).
Citroën Synergie
Citroën Xantia 1998 "Behind the instrument cluster on the red plug, the speed signal is on the Green wire." Green
Citroën Xantia 1996 Organge cable nr. 162. On the control panel on the black/blue 26 pin connector Pin 3. Orange
Citroën Xantia 1993 1998 "In the engine compartment, under the cam cover/valve chest at the engine block, at the right hand side, there is a white, 3 pin connector at the gear box. The signal is at the pin with the green cable." Green. "For cars produced since 1991 with mechanical speedometer, a hall generator is available from Citroen. Order number is: 96093558."
Citroën Xantia 1993 1996 Green Green
Citroën Xantia 1.8I 16V 1996 1998 "In the engine compartment at the left hand side of the engine is an electronic box. The signal is at pin 9 of the black, 57 pin connector." Green. The cable number is 1360.
Citroën XM 1989 In the fuse box on the white 13 pin connector Pin B1. Green.
Citroën XM Turbo Diesel 1991 1997 "In the engine compartment, at the passage to the occupant cell, there is a hall generator at the mechanical speedometer cable with a white, 2 pin connector. The signal is on the right hand pin." Black. "For cars produced since 1991 with mechanical speedometer, a hall generator is available from Citroen. Order number is: 96093558."
Citroën Xsara 2001 MY2001 Xsara (Diesel - may be the same for pertrol) - Behind fuse box on a large round black connector - White wire - No 6739 6739
Citroën Xsara 1997 Pink. On the black connector In the fuses box. Pin 3.
Citroën Xsara 1.8L & 1.9L Diesel Behind the speedometer there is a blue connector. Pin 17 carries the signal. Cable no. 465 Violet.
Citroën Xsara Picasso 2001 On the BSI unit behind the fuse box on the Yellow 26 way connector at pin No.2 wire has a number 162 No 162
Citroën Xsara Picasso "On the the BCI unit behind the fuse box, on the yellow 26 way connector Pin2 Green wire No.162" Green No.162
Citroën ZX
Citroën ZX Miami 1995 1997 In the engine compartment on the right hand side of the engine is a 3 pin connector. The speed pulse is at the green wire. Green.
Daewoo Espero 1996 1997 On the left hand side of the front passenger kickwell is the engine control unit. The speed pulse is at pin 2 of the blue 12 pin connector. Brown. "The cable colour can change, therefore it is safer to look at the location in the connector, than for the colour."
Daewoo Espero 1995 1997 Brown. In the legroom on the passenger's side on the ECU on the blue 12 pin connector Pin 2. Brown
Daewoo Korando 1999 Behind instrument cluster on the blue connector. Speed signal is on the Yellow wire. Yellow
Daewoo Lanos 1997 Green/blue. On the einge control uit on the blue 32 pin connector. Pin 2. Green/Blue
Daewoo Leganza 1997 "Drivers side kickpanel at the engine control module. 2 x 32 way white connectors, Row D, Pin 10 carries the speed signal." Green/white.
Daewoo Leganza
Daewoo Musso 1999 "Behind the Instrument cluster, on the black 16 pin connector. The speed signal is on pin 4 Yellow/white." Yellow/White
Daewoo Nexia 1995 1997 Yellow/black. Behind the control panel. Pin 16. Yellow/Black
Daewoo Nexia 1995 1997 At the rear of the instrument cluster there is a 16 pin connector. The yellow/black cable carries the signal. Yellow/black.
Daewoo Nexia 16 V 1996 1997 On the left hand side of the front passenger kickwell is the engine control unit. The speed pulse is at pin 2 of the blue 12 pin connector. Brown. "The cable colour can change, therefore it is safer to look at the location in the connector, than for the colour."
Daewoo Nubira 1997 White. On the control panel on the 20 pin grey connector. Pin 7 White
Daewoo Nubira "Behind the drivers kick panle is a Big white connector, the speed signal is on the Dark Green wire." Dark Green
DAF 85 1990 Blue wire No. 3514 @ Yellow Multi Plug with lead seal - below fuse panel Blue 3514 Speed signal to Speed Limiter !!
DAF CF 2001 Distance signal can be found on a blue wire number 3502 in the yellow connector above and behind the fusepanel. . Blue 3502
DAF DAF Trucks "Passenger side electrical complex. Remove 3 srews from the fusebox and lay to one side. There are 4 blue connectors. The front 21 pin connector carries the signal at pin 8. Cable no. 3502 OR: At back of speedometer (Caution: you must open the seal) , the " Blue.
DAF LF 2001 "Distance signal can be found on a blue wire number 3514 in the white bodybuilders connector pin B7 located in the through connection panel behind the fusepanel. RPM signal can be found in the same connector, blue wire number 3003 on pin A4 if in use. Alternatively, RPM can be found at pin 49 of the Engine Control Module on engine, this option requires a pin to be purchased from DAF, their part number is 1376684." Blue 3514
Daihatsu Applause A101 1998 On the ECU on the 22 pin connector B. Pin 7
Daihatsu Charade
Daihatsu Cuore 1999 Green/red. Behind the glove compartment on the passenger's side on the control unit. Pin 30. Green/red
Daihatsu Fourtrak
Daihatsu Grand Move J100 1997 On the ECU on the 22 pin connector A. Pin 7
Daihatsu Move
Daihatsu Sportrak
Daihatsu Terios J100 On the ECU on the 22 pin connector B. Pin 7
Dodge Neon Behind the instrument cluster. OR: At the ECU in the engine compartment on the driver's side. White/orange.
Dodge Ram "In the engine compartment, at passenger's side, there is the ECM. A white/orange cable, 1.0mm of diameter, carries the signal." White/orange.
Ferrari 456 GT "Above the engine control unit, located in the passenger kickwell, is a black 21 pin connector. The signal is at pin 3." White/yellow.
Ferrari 512 Testarossa Mod. 91 "Near the instrument panel, there is a 21 pin connector. Pin 13 carries the signal." Red/white.
Ferrari 550 Maranello "Behind the instrument panel there are 3 connectors. The central, 18 pin connector (B) carries the signal at pin 16." White/yellow.
Ferrari F355 Spider Remove speedometer (2 screws). There is a 5 pin Connector (A). Pin 4 carries the signal. Red/white.
Ferrari V355 GTV Mod.96 1996 Behind the speedometer there is a 6 pin connector. Pin 2 carries the signal. Red/white.
Fiat 178 1998 "Speed pulse not available, speed pulse generator is required." Generator Fiat spare code: 7679640.
Fiat Barchetta 1994 Blue/white. Behind the control panel on the connector B. Pin 1 Blue/White
Fiat Barchetta 1.8 16V 1995 "The white, 8 pin connector with the speed pulse signal at pin 1, is behind the instrument panel." Sky-blue/white.
Fiat Brava 1995 Grey/brown. On the control panel on the black 20 pin connector. Pin 5 Grey/Brown
Fiat Brava 12V SX 1995 1997 "The black, 20 pin connector with the speed pulse signal at pin 13, is behind the instrument panel." Grey/brown.
Fiat Brava SX 1995 1997 "In the engine compartment there is a two-coloured, 20 pin connector behind the battery with a green lower part and a grey upper part. The signal is at pin 5." Grey/red.
Fiat Bravo/Brava 1995 Grey/red. Behind the battery on the 20 pin connector. Pin 5 Grey/red
Fiat Cinquencento
Fiat Coupe 1994 Brown/grey. On the control unit on the black 4 pin connector Pin 4 Brown/grey
Fiat Coupe 2.0 16 V 1994 1996 "The speed pulse signal is at pin 4 of a black 4 pin connector, behind the speedometer." Light-blue.
Fiat Coupé 2.0 20V 1998 "There is a 55 pin connector at the Motronic module. Pin 9 carries the signal. OR: There is a hall generator in the engine compartment, driver's side, near windscreen."
Fiat Coupé 2.0 Turbo 16V Plus 1994 1996 "The black, 4 pin connector with the speed pulse signal at pin 4, is behind the instrument panel." Sky-blue.
Fiat Croma 1995 1996 "Behind the instrument panel, at the speedometer, there is a colourless, 2 pin connector. The pin with the brown cable has the signal." Brown.
Fiat Croma 1985 1996 Brown. On the control panel on the 2 pin colourless connector Brown
Fiat Ducato "No speedpulse available: The following Fiat-parts have to be retro fitted:
131 035 6080 hall generator, 010 249 754 cable shoe (Qty. 4), 042 056 495 angle-piece, 042 096 114 cable-connector."
Fiat Ducato TD 1994 It is necessary to refit this car with a speed sensor.
Fiat Fiorino 1999 No speedpulse. A hall generator has to be installed in the speedometer cable. -
Fiat Marea 1996 Grey/brown. On the control unit on the black 20 pin connector Pin 13 Grey/Brown
Fiat Marea SX 1.6 16V 1996 "The black, 20 pin connector with the speed pulse signal at pin 13, is behind the instrument panel." Grey/brown.
Fiat Multipla 1999 "Behind the instrument cluster on the C connector block, the speed signal is on pin 10 Grey/Brown wire." Grey/Brown
Fiat Multipla 1999 On the gear box sensor on the 3 pin connector Pin 2
Fiat Multipla 100 16V & JTD 105 1999 "At the rear of the instrument cluster there is a 16 pin connector. Pin 9 carries the signal. (This is the signal input - valid for all models) OR: 12 pin connector, the signal is at pin 3 (signal output, for some models you need to install a wire)" Brown/yellow.
Fiat Palio 1998 White. In the engine box on the control unit on the 55 pin connector Pin 28 White
Fiat Panda
Fiat Punto 2001 "On the ABS ECU on the gear box connector ""B"" pin 14 wire colour is Grey/Brown" Grey/Brown
Fiat Punto 1999 "The road speed signal can be located at the vehicle fuse box on the C connector block, pin number 17 Grey/Green." Grey/Green
Fiat Punto 1993 Blue/white. On the control panel on the black 20 pin connector Pin 14 Blue/White
Fiat Punto TD 70 ELX 1994 1997 "The black, 8 pin connector with the speed pulse signal at pin 4, is behind the instrument panel." Sky-blue/white.
Fiat Scudo 1997 Behind the control panel conn C. Pin 4 There is only a mechanical speedometer drive in the basic version. A pulse generator can be fitted Fiat Part No: 96 10 85 34 80.
Fiat Scudo 1996 Check the gear box to see if there's a hall generator. If not the vehicle doesn't have the speed pulse signal at all. A hall generator has to be retro fitted. Fiat acessory code 9610853480 (same as Lancia Z). -
Fiat Scudo 2l TD 2002 "Back of Engine, where plug goes to gearbox, there are 3 wires -
Pin 1 is white, 12V Live
Pin 2 is Green/Yellow - Negative
Pin 3 is beige and carries the speed pulse"
Fiat Seicento 1998 On the gear box sensor on the 3 pin connector Pin 2
Fiat Tempra
Fiat Tempra TD 1992 1993 "The white, 13 pin connector with the speed pulse signal at pin 8, is behind the digital (optical electronic) instrument panel." Light blue. "In models with analogue instrument panel, install the Fiat accessory: 7679640. In models with the air conditioning, the white, 6 pin connector with the speed pulse signal at pin 5, is behind the air conditioning control panel."
Fiat Tipo 1995 Light blue. On the control panel on the white 13 pin connector. Pin 6 Light blue
Fiat Tipo 1400 i.e. CL 1991 1993 "The white, 13 pin connector with the speed pulse signal at pin 6, is behind the digital instrument panel." Light blue. "In models with analogue instrument panel, install the Fiat accessory: 7679640."
Fiat Ulysse 1995 Green. On the control panel on the green 9 pin connector Pin 1 Green
Fiat Ulysse 1995 1998 "The green, 9 Pin connector has the speed pulse signal at pin 1, and is behind the instrument panel, near the speedometer." Green.
Fiat Ulysse 2.1 TD EL 1995 "The green, 9 pin connector with the speed pulse signal at pin 1, is behind the instrument panel." Green. The green cable has 1622 printed on it.
Fiat Ulysse Model 1999 1999 "There are 2 connectors at the gearbox (2 pin and 3 pin). The 3 pin connector carries ground, ignition-plus and speedpulse."
Fiat Uno
Ford Aerostar 1991 Passenger side kick panel. ?
Ford Cougar 1998 White/green. On the black 6 pin connector Pin 1 White/green
Ford Cougar 16 V & 24 V 1998 "At the gearbox there is a triangular or an oval connector. (V6 engine and automatic transmission have oval connector). OR: At left MacPherson strut tower (spring) there is a rectangular connector. Pin 13 or 11 (Not sure, which one is right,)" White/blue. "Preinstalled radio: Radio connector, cable colour white/green."
Ford Escort 1.4l 1995 White/violet. On the gear box sensor. White/violet
Ford ESCORT CL Tunier 1991 "1. In the passenger side kickwell, at the left hand door post under the glove box there is a yellow, single pin connector. This connector may be loose or attached to another connector. 2. At the gear box there is a hall generator at the mechanical speedom" Brown/white. "General: the control unit for diesel engines does not need the speed pulse, but for some optional equipment (air conditioning, automatic transmission, etc.) there is a hall generator at the gear box. If there is any doubt look here first."
Ford Escort Cosworth 1992 1996 The speed pulse for a 1995 N Registration Cosworth is Brown/white at the sender unit on the gearbox. It then goes to the instrunment cluster and also the radio at pin 6. You can also connect to it at the EEC (Electronic Engine Control) Module at the passe
Ford Expedition 1998 Behind the speedometer the grey/black cable (cicuit 679) carries the signal. Grey/black.
Ford Explorer 1992 Light blue. In the doorsill on the driver's side Do not connect navigation to the speed signal sensor.
Ford Explorer 1997 1996 1998 "The speed pulse wire comes from the top of the gearbox and splits off to the powertrain control module, the speed control module and also to the instrument cluster. The connector is a 12 way connector and the speed pulse is at pin 12. the colourof the wir" Grey/black.
Ford Explorer 4.0l 1996 "In the engine compartment, at the front passenger side, behind the wheel housing, there is the cruise control unit. At the black, 13 pin connector is the signal at pin 3." Grey/black. Signal can be found at Speedometer too. Same cable colour.
Ford Explorer Mod 95 1993 1995 "Behind the instrument cluster there are a 16 pin and a 11 pin connedctor. The 11 pin connector carries the signal, cable colour grey/black" Grey/black.
Ford Fiesta 1996 White/red. On the control unit in the legroom on the driver's side White/Red
Ford Fiesta 16V 1996 "In the passenger side kick panel on the ""A"" post, there is a harness to the engine control unit. The white/red wire in the harness is the speed pulse signal." White/red.
Ford Focus 2001 "Back of radio, on the black connector" Green/White
Ford Focus 1998 White/green. On the radio on the 18 pin connector Pin 6
Ford Focus 1.8 DI 1998 "At the gearbox, there are 3 cables: black, brown and yellow/brown. The yellow brown one carries the signal." Yellow/brown. Cable colours may vary. Access to the gear box: remove plastic cover at bottom.
Ford Focus 2.0 16V 1998 "At ECU behind the glovebox, right hand side. Cable colour white/blue. Colors may vary." White/blue. 0
Ford Focus Turbo Diesel 2002 "Black Connector, at back of radio - Green/White"
Ford Galaxy 2001 Rear of Instrument cluster on the 30 way green connector. Pin3 (Violet) is the speed signal. Violet
Ford Galaxy 2001 On the back of the radio- Yellow connector- Violet wire Violet
Ford Galaxy 1998 1999 Rear of instrument cluster on the 28 way red connector on pin 7. Violet
Ford Galaxy 1995 1998 "All models have the location of the speed pulse in the driver side kickwell. The connector is behind or on the fuse box. The colour of the connector can vary. If there is no signal, there is a wire within a blue connector above the fuse box." Blue/white.
Ford Galaxy "Behind the speedometer leftside (look facing the engine), there is a red 28 pin connector. Pin 7 carries the signal." Violet.
Ford Galaxy 1.9l Tdi 1995 Blue/white. On the green 4 pin conn or blue 5 pin conn behind the fuse unit. Blue/white
Ford Galaxy Tdi 1999 "Behind the instrument cluster on the red connector, the speed signal is on the Violet wire." Violet
Ford KA 1996 In the middle of the engine compartment at the dash panel under the black cover panel is a black 3 pin connector. The signal is on the yellow/red wire. Yellow/red. Note: At this connector the cable colour changes from yellow/red on one side to white/blue at the other side.
Ford KA 1996 White/blue. On the control unit in the legroom on the driver's side. White/blue
Ford Kia
Ford Lincoln Navigator Behind the speedometer there is a white 16 pin connector. Pin 7 carries the signal. Grey/black.
Ford Lincoln Town Car 1998 Use the SMM102 from Sales Marketing 01386 554210. Connect the SMM102 to a Dark Blue/Yellow on the multiplug near to ECU (not the light blue/yellow) Dark Blue/Yellow
Ford Maverick 1993 Yellow/black. Behind the centre console on the ECU on the 34 pin connector Pin 11 or 32 Yellow/black
Ford Maverick 1993 "The signal can be found at the engine control unit, within the centre console, close to the gear lever. Even with different engine specification, the position stays the same. For diesel engines the signal is at pin 11 and for petrol engines at pin 32." Yellow/black.
Ford Mondeo 2001 "The speed signal can be found on the steering column on the connector, wire colour is White/.Blue." White/Blue
Ford Mondeo 1996 Green/white. On the radio connector C. Pin 6 Green/white
Ford Mondeo 1993 1998 "1. The engine control unit is in the engine compartment on the passenger side at the bulkhead between the engine compartment and occupant cell. The signal is at pin 3 of the black, 60 pin connector. 2. At the gear box there is a hall generator at the mec" White/violet. "General: the control unit for diesel engines does not need the speed pulse, but for some optional equipment (air conditioning, automatic transmission, etc.) there is a hall generator at the gear box. If there is any doubt look here first (2nd location)."
Ford Mondeo (V6) Model 1997 1996 "1. Connector at original Ford OEM-Radio (7000RDS), cable color white green.
2. There is a distributor box above the fuse box. The middle one of 7 connectors (16 pin) carries the signal at a white/blue cable." White/green or white/blue.
Ford Mondeo 1.8 TDI 1996 Read of the instrument cluster on the White/Blue wire. White.Blue
Ford Mondeo Ghia 2002 the colour is Green/White and is located behind the radio
Ford Mondeo LX 1998 "Speed signal can be found under the Brake master Cylinder, on the 3 way connector white/blue." White/Blue
Ford Mondeo ST24 The speed pulse wire can be found at the radio position. The wire is in a Yellow connector with 3 wires in it. The white/green wire carries the speed pulse signal. White/green.
Ford Mondeo TD 2000 "At the rear of the radio there is 3 connector blocks, the smallest has the speed signal on it. The speed signal is on the White/Green Wire." White/Green
Ford Mondeo Tunier CLX 1993 1999 "In the engine compartment, under the brake fluid reservoir, at the left hand side, on the main wiring harness is a black 3 pin connector. The signal is at the pin with the white/blue cable." White/blue.
Ford Mustang Mod. 95 1995 Passenger side kick panel. OR: At ECU Grey/black. Analog signal! Does not work with the PS-system. Signal amplifier required.
Ford Probe 16V & 24V 1996 Orange/black. In the engine box on the driver's side on the conn C 180 under the break cylinder. Orange/Black "On older cars before 3/96, the speed signal is available on the control panel on the white 14 pin connector Pin 1."
Ford Probe II 1991 1998 "The signal is provided at the instrument panel, behind the speedometer, at pin 1M of a white, 14 pin connector." Green/red.
Ford Puma 1997 In the engine box on the connector C 190. Pin 2
Ford Puma 1.7 1997 "At the gearbox, there is a 3-pin connector. One pin is +12 V, one is ground, one is the signal." Yellow/brown. Mechanical speedometer.
Ford Ranger 1999 "The speed signal can be found on the rear axle on the ABS sensor. On the differential there is a ABS Sensor with two wires on it, one has 35volts on it and the other is the radio speed signal."
Ford Scorpio 1988 - 1993 1988 1993 "1988 - 1990: electronic speedometer, yellow/red cable at speedometer carries the signal. 1990-1993: mechanical speedometer. From 1993: electronic speedometer, black/blue cable at speedometer has the signal."
Ford Scorpio Tunier 1995 1997 "In the front passenger side kickwell under the glove box at the left door post there is a grey, 76 pin engine control unit connector. The signal is at pin 58." White/red.
Ford Scorpio Tunier 1993 "A triangular, 3 pin connector is available at the rear end of the gear box with the signal at pin 3." Black/blue.
Ford Scorpio/Granada -1995 White/green. On the radio on the 6 pin connector Pin 1 White/green Speed signal alternative; on the control panel on the red connector (cable colour: brown/yellow).
Ford Sierra
Ford Sierra Tunier CLX 1988 1992 "In the engine compartment, on the passenger side, at the bulkhead, is a hall generator with a grey, 2 pin connector. Connect to the yellow/brown wire." Yellow/brown.
Ford Tourneo 1994 1996 No speed pulse!
Ford Transit 2001 "The speed signal can be found at the back of the instrument cluster. In a Right hand drive and you're looking from the drivers seat, the connector is the one on the right hand side. The wire colour is White/Purple." White/Purple
Ford Transit 1996 White/brown. On the control panel on the black 10 pin connector Pin 7 White/brown
Ford Transit before 1995 1995 "Hall generator has to be retro fitted. Ford Part-No. for generator is 07217009, for seal is 06152682 (generator and seal together is 1021992). Install near pinion at rear end of cardan-tunnel, leftside 3cm diameter cover. Connections: brown/black = +12V, " Yellow.
Ford "Transit from 1995, Petrol" 1995 At controler-unit in glove-box there is a big connector. Pin 36 carries the signal. White/blue.
Ford Transit Model 1997 1997 Behind speedometer at pin 6. White/blue.
Ford Windstar 1999 1999 At Ford Radio there is a 7 pin connector. Pin 5 or pin 3 carries the signal (it depends on the direction you are counting from) Dark-brown.
Ford Windstar 1995 1999 Vehicle has mechanical speedometer. A hall generator from VDO-Kienzle has to be retro fitted.
Ford Windstar 1995 Green. On the gear box sensor on the 2 pin connector Green
General Motors Astro Van 1995 "Behind the instrument panel, there is the controler. On the back of the controler, there is a 9 pin connector. Pin 9 carries the signal." Bright-blue/black.
General Motors "Buick Roadmaster, Caprice, Impala SS" 1996 "Dark green/white cable at the radio connector or at the cruise control module on the left frontwheelwell, pin K." Dark-green/white. "Valid for Roadmaster, Caprice, Impala SS."
General Motors Corvette 1997 "Remove the right front wheel, then remove the left cover. Behind this cover there is a controller (approx. 20cmx15cm). Unscrew the multi pin connector. The red connector carries the signal at pin 55." Green/white. There are several green/white cables.
General Motors "Express, G-Van, Savana" 1998 "1. Dark green at cruise control module drivers side of engine compartment in a 10 pin connector pin K. 2. At the Powertrain Control Module, (behind centre of dash), Brown wire."
General Motors Truck/Coach "At the rear most part of the gear box, there are two black, 2 pin connectors. The signal is at the pin with a sky blue wire, in the first connector." Sky-blue.
General Motors VAN Doure 2500 Behind the speedometer. Bright-blue/black.
General Motors Winnebago 1998 Behind the instrument cluster on the Light Green wire in pin 27 Light Green
General Motors Winnebago Mod. 1997 Pin 28 at instrument cluster. Dark-green.
General Motors "Yukon, Tahoe" 1997 "In the engine compartment, at the driver side, at the top of the dash panel is the cruise control unit. Pin 6 (F) of the black 10 pin connector has the signal." Dark-green/white.
HDPIC (Mitsubishi) Galloper 2.5 TD & 3.0 V6 1998 Behind the instrument cluster there is a black and a white connector. The black one carries the signal at second pin from left side (looking facing the engine). White/blue.
Honda Accord 1998 Blue/white. On the gear box sensor on the 3 pin connector Speed signal alternative: On the ECU in the legroom on the passenger's side on the 16 pin connector orange cable.
Honda Accord 1991 1996 "The speed pulse signal is at the outside pin of a grey, 3 pin connector. This connector is in the engine compartment on the driver side, on the gear box." White/blue.
Honda Accord 2.0i ES 1993 1996 "At the gearbox in the engine compartment there is a 3 pin connector. One cable is +12 V, one is ground and one is the speedpulse with the cable colour white blue." White/blue.
Honda Accord EXi 2.0 1988 1991 No speed pulse signal!
Honda Civic 1991 "The speed pulse signal is at the outside pin of a grey, 3 pin connector. This connector is in the engine compartment on the driver side, on the gear box." Blue/white.
Honda Civic 1.6i 1996 Passenger side kick panel. Blue/white.
Honda Civic EJ 6 1996 Blue/white. On the gear box sensor on the 3 pin connector
Honda Concerto
Honda CR-V 1997 On the blue 24 pin connector Above the fuse unit. Blue/white.
Honda CR-V 2.0 1997 1999 "The speed pulse signal is at the outside pin of a grey, 3 pin connector. This connector is in the engine compartment on the gearbox." Blue/white.
Honda CRX 1994 On the gear box sensor on the grey 3 pin connector White/yellow.
Honda CRX 1992 1998 "The speed pulse signal is at the outside pin of a grey, 3 pin connector. This connector is in the engine compartment on the driver side, on the gear box." Yellow/white..
Honda HRV 1999 On the blue 24 pin connector Above the fuse unit. Blue/white.
Honda Integra Type-R 1998 On the ECU in the legroom on the driver's side on the connector C Orange.
Honda Jazz MY2002 2002 "Back of instrument cluster, Green connector" Blue/Yellow
Honda Legend 1998 1999 "Behind instrument cluster on the red 20 pin connector, 8 pins on top and 12 pins below. 8 pin row Blue/White wire." Blue/White
Honda Legend 3.5i V6 1996 1999 1. There are several connectors in the engine compartment at the passengers side. One of these connectors has a blue/white cable which carries the signal. 2. At the ECM in footwell of driver. Same cable colour. Blue/white.
Honda Legend 3200 1996 On the control unit on the passenger's side on the 12 pin connector Pin 7.
Honda Legend Auto
Honda Legend Model 1992 Behind the speedometer there is a 20 pin connector. 3rd pin from left carries the signal. Caution: there are 2 cables with the same colour! Yellow/red.
Honda NSX 1991 Behind the seats on the control unit on the connector C2 Yellow/red.
Honda NSX
Honda Odessy Mod.95 1995 At the ECU in the passenger side footwell. OR: Cruise control computer in the center console. Orange. Be careful when tapping into the speedpulse line on the ECU. There are 2 orange wires on the 16 pin plug. Look for the larger gauge orange wire or the orange wire with the red dots.
Honda Prelude 1992 1996 "The speed pulse signal is at the outside pin of a grey, 3 pin connector. This connector is in the engine compartment on the driver side, on the gear box." Orange.
Honda Prelude 2.2i VTEC 1997 1999 "The speed pulse signal is at the outside pin of a grey, 3 pin connector. This connector is in the engine compartment on the gearbox." Blue/white.
Honda Prelude BB8/9 1997 On the gear box sensor on the 3 pin connector Blue/white.
Honda Shuttel 2.3 LS 1998 " back of instrument panel, green 22-way connector pin 5, Blue/White wire with Silver Bands."
Honda Shuttle 1995 On the gear box sensor on the grey 3 pin connector. Pin 2 Orange.
Honda Shuttle 1995 1998 "The speed pulse signal is at the outside pin of a grey, 3 pin connector. This connector is in the engine compartment on the driver side, on the gear box." Orange.
Hyundai Accent 1994 1999 Left side near steering column on th multiple connector M 104 Pin 7 Yellow/white..
Hyundai Accent GSI 1997 "The speed pulse signal can be found at the back of the instrument cluster, at the left of the steering column at a blue 22 pin connector and also at a white 18 pin connector next to the relay box. The colour in all cases is Yellow/white.." Yellow/white..
Hyundai Atos 1998 In the center console on the connector MC 01 Pin 12 White.
Hyundai Coupe 1996 Left side near steering column on th multiple connector MD 01 Pin 4
Hyundai Coupe FX 1996 "In the middle of the engine compartment, behind the engine block, at the gear box is a black 3 pin connector. The signal is on the Yellow/white. wire." Yellow/white..
Hyundai Elantra MY2002 2002 "Back of instrument cluster, 16 pin connector" Grey/Orange
Hyundai H1 Starex 1998 Left side near steering column on the multiple connector EM 01 Pin 6 Yellow/white..
Hyundai Lantra 1994 1998 "From 1994: At Speedometer, the Yellow/white. cable carries the signal. From 1997: The hall generator is in the speedometer. Pin 4 of the right hand side (looking facing the engine) connector at the speedometer carries the signal." see location
Hyundai Lantra 1991 Left side near steering column on the green 22 pin connector MCO 2 Pin 9 Yellow/white..
Hyundai Pony 1991 1994 Left side near steering column on the multiple connector M104 Pin 7 Yellow/white..
Hyundai S-Coupe 1996 Left side near steering column on the multiple connector MC 01 Pin 7 Yellow/white.
Hyundai Sonata 1991 1994 Left side near steering column on the multiple connector MIO 1 Pin 2 Yellow/white.
Hyundai Sonata GLS 16V 1993 1996 "In the middle of the engine compartment, behind the engine block at the gearbox, is a black 3 pin connector. The Yellow/white. cable is the speed pulse signal." Yellow/white.
Hyundai Trajet 1999 "Behind the instrument cluster, on the centre plug pin B6 cable colour Brown." Brown
Hyundai XG 30 1999 On the control panel on the connector JM 02 Pin 4 Brown.
Infinity G 20 1995 Behind instrument cluser. OR: Engine control module in centre console. Yellow/green.
Infinity I 30 1995 At cluster. OR: Cruise control module to the right of the steering column. Purple/blue.
Infinity J 30 1995 Behind the instrument cluster. OR: Drivers kick panel below fuse box. Yellow/blue.
Infinity Q 45 1995 In back of instrument cluster. Yellow/green.
Isuzu Trooper 2001 Behind instrument cluster on the small connector pin 5 has the signal wire colour Blue. Blue
Isuzu Trooper 2001 "Behind the instrument cluster on the small connector, pin 5 wire colour is Blue." Blue
Isuzu Trooper 1999 "Back of instrument cluster, right hand black connector, pin 5." Green with Silver rings
Isuzu Trooper
Iveco 35-10 1997 "Inside the instrument compartment in a 5 Pin white connector, at the central Pin. The cable contained the number n° 5517 and the colour is orange." Orange. The cable colour can change. Please look for the cable number 5517.
Iveco Cargo/ 65C15 The speed signal can be found on wire 5517 wire colour is usually orange. 5517
Iveco Daily 1997 At the driver side door post over the fuse box is a black converter box. The signal is at pin 1 of the white 8 pin connector. The cable has the number 5517. Orange. The cable colour can change. Please look for the cable number 5517.
Iveco Daily 2000 including model 35E11 2000 "At the instrument cluster there are four connectors, the distance signal can be found on orange wire number 5517 in the top left connector. The RPM signal can be found in the same connector on wire number 5512" Orange 5517 The cable colour can change. Please look for the cable number 5517.
Iveco EuroStar 1997 Distance output from the 1318 tachograph terminal B7 or D3. White
Iveco EuroTech 1996 Distance output from the 1318 tachograph terminal B7 or D3. White
Iveco Turbo Daily 1996- In the engine box at the right below the wiper engine. Orange 5517. Important: constant power con 30 (green) switched power (red) is not constant when starting engine.
Jaguar Daimler Double Six 1988 1992 "1. Behind the speedometer there is a 7 pin connector, the upper pin, pin 1, carries the signal. Cable colour yellow. 2. At speedometer there is a 48 pin connector, pin 2 carries the signal, cable colour blue (pin1 empty) 3. At the gearbox there is a 2 pin" see location "How to remove the speedometer: Turn the instrument 180° to the right, then press down, then turn 20° to the left, then pull out."
Jaguar Sovereign 4.0 1994 1997 "The signal is at pin 1 of a loose, yellow, 8 pin connector, located in the centre console at the same height as the glove box." Blue.
Jaguar S-Type 2.5-3.0 l 1999 "This vehicle is CAM Bus. O/S rear bench seat, white/blue wire. This cable needs to be connected via an AES-4 unit to the Black/white wire on the navigation computer." IMPORTANT.The side light and rev. signals are switched earth.
Jaguar S-Type 3.0 V6 & 4.0 V8 1999 Definitely no speedpulse available. Vehicle has a BUS system. Easiest way would be to install a Hall generator from VDO at the cardan shaft. -
Jaguar XJ Sport 1999 On the rear of the audio Blue/White. Blue/White
Jaguar XJ12 1995 Under the dashboard on the driver's side threre is a 48 pin connector Blue/red.
Jaguar XJ12 6.0 1994 1996 There is a GR-controller unit 12 V (GA 006 370-00) at the blackbox below the glovebox-cover. The 20 pin connector carries the signal at pin 6. Blue.
Jaguar XJ40 1995 Remove the cover below the speedometer. There are 2 connectors. The bigger one carries the signal at Pin 2 Blue.
Jaguar XJ8 1997 1998 "At the rear drivers side heel board (under the rear seat) , there is a 14 way connector. The speed pulse is blue/white wire at pin 5." Blue/white.
Jaguar XJR 1997 1998 "You can find the signal behind the dashboard at connector FC 25, pin 4 (cable colour: orange/black) or pin 5 (blue/black) or pin 6 (orange/black). It's also possible to find the signal at the radio connector at pin 20, cable colour blue/white." see location
Jaguar XJS 4.0 1994 1996 On the passenger's side behind the air distribution duct on the black 6 pin connector Pin 2 White/yellow. Important: The speed signal is also available on the yellow 8 pin connector Pin 1; cable colour blue.
Jaguar XJS 4.0 Coupe 1994 1996 "In the centre console, at the front passenger side behind the air distribution duct there is a loose, black, 6 pin connector. The signal is at pin 2." White/yellow.
Jaguar XJS 6.0 1991 1994 In the center console (passenger's side) at the same level as the glove compartment. Blue.
Jaguar XJS V12 You can find the signal at the board computer above the radio. There are two 3 pin connectors. The connector with the yellow cable carries the signal. Yellow.
Jaguar XK8 1998 On the radio connector Pin 1 Blue/white.
Jaguar XK8 1996 1998 At the rear of the centre console there is a 20 pin yellow connector. The Speed Pulse wire is blue/white at pin 11 Blue/white. Speed Pulse should not to be taken at the radio harness as it will invalidate warranty of the vehicle.
Jaguar XK8 Auto
Kia Clarus 1996 Behind the instrument cluster on the 16 pin connector. Pin number 2c orange/Pink wire Orange/Pink
Kia Clarus 1996 On the control panel on the 16 pin connector Pin 2 c Orange/pink.
Kia Mentor
Kia Pride 1995 It is necessary to refit this car with a speed sensor.
Kia Sedona 2002 Behind the instrument cluster Pin A8. White
Kia Sedona 1999 On the OEM radio connector is a white/Black wire which is the road speed signal. White/Black
Kia "Sephia 1,51/1,61" 1993 On the control panel on the conn A Pin A k Pink. Important: Only for cars with airbag.
Kia Sephia 1.5l 1993 "Back of instrument cluster on the ""a"" connector pin number Af green/red wire." Green/Red
Kia Sephia 1.5l/1.6l 1993 "Back of instrument cluster in connector ""a"" pin number ""Ak"" pink wire." Pink wire
Kia "Shuma 1,51" 1998 On the passenger's side behind the center console on the 10 pin connector Pin 10 Green/orange.
Kia Sportage 1994 "Back of instrument cluster on the 12 pin connector, the speed signal is on the Pink/Blue wire." Pink/blue.
Kia Sportage "Behind the instrument panel, the blue/black cable carries the signal. OR: Below the radio in the centre console, right hand side, there is a block of approx. 4 distributor connectors. Same cable colour. OR: In the passengers footwell, there is a engine co" Blue/black or blue/green.
Lada Niva
Lada Riva
Lada Samara
Lamborghini Diablo "Under the dashboard, behind the instrument panel, there is a black box ""GFA"" (screwed with 3 bolts). To access, you only have to remove the instrument panel. The speedpulse is at the 17 pin connector at pin 17 (input from the sensor), or better at the 13 " Black/red. MY 99: If radio connector (ISO) is available please use Pin 1 in chamber 3.
Lamborghini Diabolo Roadster 1996 "Behind the speedometer is a white, 9 pin connector. Pin 1 has the signal." Black/red.
Lancia Dedra 1994 1996 "In the engine compartment towards the bulkhead, there is a black or grey 3 pin connector at the connection between transmission and speedometer cable. The speed pulse signal can be found at the centre pin." Sky blue.
Lancia Dedra
Lancia Dedra 2.0 turbo ds LE 1991 1993 "The white, 6 pin connector with the speed pulse signal at pin 5 is behind the air conditioning control panel." Sky blue.
Lancia Dedra 835 1994 On the control panel on the 8 pin connector Light-blue.
Lancia Delta 1993 On the control panel on the black 8 pin connector Pin 7 Light-blue.
Lancia Delta 1991 1996 "The black, 8 pin connector with the speed pulse signal at pin 7, is behind the instrument panel at the rear of the speedometer." Sky-blue.
Lancia Delta 1.9 TDS 1994 1996 "The black, 8 pin connector with the speed pulse signal at pin 7, is behind the instrument panel." Sky blue.
Lancia Delta HPE 2.0 HF 1995 1996 "The black, 8 pin connector with the speed pulse signal at pin 7, is behind the instrument panel." Sky blue.
Lancia Kappa 1995 On the control unit on the black 20 pin connector Pin 14. Yellow/black.
Lancia Kappa 1995 1998 "The black, longish, 20 pin connector with the speed pulse signal at pin 14 is behind the instrument panel at the rear of the speedometer" Yellow/black.
Lancia Kappa - Model 1998 "In the relay compartment on the right of trunk there is 6 pin white connector. Pin 4, cable colour brown/green, carries the signal." Brown/greeen. "In the rare case of unavailability of the described connector, pick up the signal from pin16 of the connector at the back of the speedometer. Do NOT take pin 14. Pin 16 has NO wire connected. Add a wire."
Lancia Kappa 2.0 1995 1996 "The black, 20 pin connector with the speed pulse signal at pin 14, is behind the instrument panel." Yellow/black. "With automatic transmission, there are two different black connectors. The signal is always in the right hand connector (viewing from the seat) at pin 14."
Lancia Thema 1995 On the control panel on the white 5 pin connector Pin 1. Brown. Important: Speed signal - Alternative: On the control panel on the black 8 pin connector Pin 6 (brown).
Lancia Thema 16V LE 1992 1993 "Behind the instrument panel is a black, 8 pin connector, with the signal at pin 6." Brown. "There are two different speedometers. One has a black, 8 pin connector, with the signal at pin 6, the other has a brown connector, with the signal at pin 1."
Lancia Thema 16V LX 1991 1992 "The white, 5 pin connector with the speed pulse signal at pin 1, is behind the instrument panel." Brown.
Lancia Y 1.4 1996 "The white, 20 pin connector with the speed pulse signal at pin 16, is behind the instrument panel." Sky-blue/white.
Lancia Zeta 1995 Behind the control panel on the green 9 pin connector Pin 1. Green.
Lancia Zeta 1995 1996 "The green, 9 pin connector with the speed pulse signal at pin 1 is behind the instrument panel close to the speedometer." Green.
Land Rover Defender 1996 On the control panel on the 10 pin connector
Land Rover Defender TD5 1998 There is a grey 14-pin connector (C1048) behind the instrument panel. Pin 10 has the signal. Black/red.
Land Rover Discovery 1999 The speed pulse signal can be found at the S.L.A.B.S (Self Leveling ABS) unit and also at the instrument cluster. The colour of the wire is Pink/green. Pin 16 @ instrument panel. Also can be found at the Tuner/amplifier on pin 20. Pink/green.
Land Rover Discovery 1998 "Under the steering-wheel-cover there are several plugs in a row. The upper green plug (C0229), pin 5, has the signal." Pink/green. Also valid for V8 engine.
Land Rover Discovery 1991 1998 Below the steering column is a red 22 pin junction connector. The signal is at pin 2. Yellow/Pink. The location of the speed pulse signal in the connector can change. The cable colour remains the same.
Land Rover Discovery
Land Rover Discovery 1 1990 1998 Beside the steering rod on the red 22 pin connector Pin2 Yellow/pink.
Land Rover Discovery 2 1998 On the control panel on the connector CO 230 Pin 16. Pink/green.
Land Rover Discovery Diesel 2002 The speed signal can be found at the offside inner wing just behind the headlight. The wire colour is White/Orange. White/Orange
Land Rover Discovery TD5 2002 "Speed signal can be found at the cruise control ECU pin 15, The Engine ECU pin 22, the ACE ECU pin 5 and on the Amplifier pin 20. The colour is Pink/Green" Pink/Green
Land Rover Freelander 2001 "C0285 green 20 way connector. Pin 10/11/12 white with orange.behind instrument cluster on the bulkhead, can be seen"
Land Rover Freelander 1998 Above the fuse unit on the grey 26 pin connector Pin 6. White/orange.
Land Rover Freelander 1998 "At the driverside, over the fuse box is grey, 26 pin connector. Pin 6 has the signal." White/orange.
Land Rover Freelander MY2002 "Bottom right hand side of fuse box, on a grey multiplug connector" White / Orange
Land Rover Range Rover 1994 1999 On the right hand side of the instrument panel there is a black 20 pin connector. The speed pulse signal is at pin 2 of the bottom connector row. Yellow. Also valid for model 4600 HSE.
Land Rover Range Rover 2 1994 On the BECM on the 20 pin connector C 114. Pin 11. Yellow/green. Important: BECM = Body Electrical Control Module.
Land Rover Range Rover 4.0 SE 1994 1999 "Below passenger seat (remove cover around seat at fusebox) there is the main control unit called BECM. 16 pin connector, pin 16 (location is corner of connector)" Yellow.
Lexus ES-300 Mod.95 1995 Behind the instrument cluster. OR: Cruise control computer high in the dash on the passenger side. Violet/white.
Lexus GS 300 1993 1997 The engine control unit is located in the front passenger kickwell under the footrest panel. The speed pulse signal is at pin 2 of the dark grey 40 pin connector. Violet/white.
Lexus GS 400 1992 1997 Behind the glove compartment on the grey 28 pin connector Pin 12. Violet/white.
Lexus GS300 1998 Under the drivers steering column is a black box with a blue connector. The road speed signal is on a Blue / White with silver bands. Blue / White with silver bands/
Lexus IS 200 1999 "Behind the instrument panel there are two connectors, with 14 pins and 22 pins. In the 22 pin connector the speed pulse at pin 13. OR: In the passenger side kickwell, at the left hand door post under the glove box: Here there are 4 different grey connecto" -
Lexus IS 200 1999 "On the right hand side of the engine compartment, at the front, next to the fuse box there is an injection computer. It has 4 big white connectors. The 28 pin connector carries the signal at Pin 28. Pin 28 is at the bottom of the right side." White/blue stripe.
Lexus LS 400 1992 1995 "At the cruise control unit, behind the glove box, the signal is located at pin 20 of the green 26 pin connector." Violet/white.
Lexus LS400 1997 "Cruse Control ECU, behind the glovebox on the grey 26 way conector. Pin 20 is the road spedd signal wire colour is violet/white" Violet/white
Lexus SC-400 1994 Behind the instrument cluster. OR: Passenger side kick panel. Pink.
Leyland Truck 45 ? Speed pulse generator and Voltage dropper required. Please phone VDO customer service for pricing and availablity.
Lincoln Continental 1999 2001 "Pin 9 of the Radio or on the ECU in the passenger Kick well, wire colour is grey/black" Grey/Black
Lincoln LS 4 door sedan 2000 2001 Passenger kick well ECU pin 84 wire colour is dark blue/yellow Dark blue/yellow
Lincoln Navigator 1999 2001 Radio pin 9 or ECU in passenger kick well wire colour grey/black Grey/Black
Lincoln Town Car 1999 2001 Passenger kick well ECU pin 84 wire colour dark blue/yellow Dark blue/yellow
Lotus Elan "Behind the instrument panel, there is a connector with the inscription B40. The black/yellow cable carries the signal." Black/yellow. The mechanical speedometer produces the signal in the instrument panel.
Lotus Elise 1996 On the control panel. Yellow/grey.
Lotus Elise The speed pulse wire at the rear of the instrument cluster. The colour of the wire is Orange/grey and is at Pin A5. Orange/grey. "LOTUS have confirmed that the speed signal for the Elise is 0.5V HIGH and 0.29V LO, +/- 0.05V. The peak to peak voltage is too low for our system. A signal amplifier is needed."
Lotus Espirit 1991 On the ECU left behind Pin 60. Orange/brown.
Lotus Espirit The speed pulse wire is at the rear of the instrument cluster. The colour of the wire is Orange/brown. Orange/brown.
MAN Semitrailers "There is a white cable, inscription no. 16500 or 605, at the speedometer. OR: There is a big controler in the fuse box. Down to the right, there is a white cable, no. 16500 or 605." White. Behind the speedometer there is always a imprinted wiring diagram. The speed signal's voltage is 24V.
MAN TG-A 2000 Wire number 16500 found in the harness running up the offside door pillar. Tachograph output signal. Pink "This speed signal is an output from the tachograph which is not normally used by the manufacturer.
However, MAN service bulletin states the signal ( if used ) must be amplified, so that others can also use it."
MAN Trucks "At the tachograph, there is the connector B2. The black/white cable with the inscription ??56?? carries the signal." Black/white. Behind the speedometer there is always a imprinted wiring diagram. The speed signal's voltage is 24V.
Maserati 3200 GT 1999 "ISO-Connector of radio, chamber 3, pin 1." Red/black.
Mazda 121 1998 On the control panel pin 18. White/blue.
Mazda 323 1994 On the driver's side in the legroom on the door post on the green 26 pin connector Pin 2 Green/red.
Mazda 323 1994 1997 "In the driver side kickwell in the distribution box at the door post, there is a green, 26 pin connector. The signal is at pin 2." Green/red.
Mazda 323 1991 1994 On the control panel on the black 12 pin connector Pin1. Green/red.
Mazda 323 1991 1994 "A black 12 Pin connector with the signal at pin 1 is located at the instrument panel. Even if there is no cable, the signal is still present." Green/red. "If there is no cable connected at Pin 1, the speed pulse is present nevertheless."
Mazda 323 Mod.99 1997 "At the backside of the instrument cluster, there is a 20 pin connector, Pin 4 carries the signal." Grey/white.
Mazda 323P 2.0 1997 "The engine control unit is located in the centre console, on the transmission tunnel. The signal is at pin 4 of the green 16 pin connector." Green/red.
Mazda 626 1991 1997 "The signal can be found at pin 6 of a white 14 pin connector at the instrument panel, behind the speedometer." Green/red.
Mazda 626 Back of instrument cluster. Green/red.
Mazda "626 2.0, Mod. 97" 1997 "At the rear of the instrument cluster, there are 3 connectors. The white centre one carries the signal. Pull off the connector, look at the contacts: upper row, second pin from left." Green/red.
Mazda 626 Turbo Diesel 1991 Black middle connector behind the instrument panel. Green/white.
Mazda "626 V6 2,51" 1994 On the control unit on the white central connector. Green/red/white. Various cable colours.
Mazda 929 1995 1. At the cruise control in drivers kick panel. 2. Behind instrument cluster. Green/red. It is not recommended to try dissassembling the instrument cluster. The easiest location is to tap into the sensor wires at the drivers kick panel.
Mazda B200 pick up 2000 "The speed signal can be found at the rear of the instrument cluster. There is a 2 plugs, one white and one black. The speed signal is on the White plug and the wire colour is Light Blue with silver bands." Light Blue with silver bands
Mazda Demio 1998 On the control unit on the 14 pin connector Pin 4 (1 D). Green/red.
Mazda Malinia 1995 Behind instrument cluster Green/red.
Mazda MPV 2.5 TD 1996 "In the rear of speedometer, a screw (marked: REED SW) has to be connected." --
Mazda MPV 3.01 1996 In the legroom on the passenger's side on the connector X 11 Green/red.
Mazda MPV 3.0i V6 1994 "Behind the instrument panel there is 14 pin connector. Pin 1G, cable colour green/red carries the signal." Green/red. 2nd location: At ECM behind passenger footwell.
Mazda MPV Diesel 1996 At this car it is necessary to fit a speed signal sensor EA 1190.
Mazda MX-3 1994 1998 "The engine control unit is located in the centre console, on the transmission tunnel. The signal is at pin 5 of the yellow 22 pin connector." Violet/red.
Mazda MX-3 1991 1994 "The engine control unit is located in the centre console, on the transmission tunnel. The pulse is at pin 7 of the yellow, 26 pin connector." Black/white.
Mazda MX-3
Mazda MX-3 EC 1994 In the console on the engine control unit on the yellow 22 pin connector Pin 5 Violet/red.
Mazda MX5 2001 "Behind Speedo, Black connector, pin 4 - Orange wire"
Mazda MX-5 1998 "At the front passenger side,in the foot well, under the foot rest is the engine control unite. The signal located at pin 2 of a green, 16 pin connector." White/black.
Mazda MX-5 1994 1997 "The signal is at pin 3 of a blue, 16 pin connector, under the steering column." Green/red.
Mazda MX-5 1990 1998 Green/Red under the steering wheel. Pin 3 in the 16 pin connector Green/red.
Mazda "MX-5 16V, 1.6i & 1.9i" 1998 "At the backside of the instrument cluster, down right hand side, there is a black connector, Pin 4 or 3 carries the signal." White/black. NEVER take the signal from the engine control unit (ECU).
Mazda MX-6 1992 1997 "The speed pulse signal is available at pin 6 of a white 14 pin connector at the instrument panel, behind the speedometer." Green/red.
Mazda MX-6 1991 On the control panel on the white 14 pin connector Pin 6 Green/red.
Mazda Premacy 1999 On the control panel on the connector 3 O. Green/red.
Mazda RX-7 FD 1996 On the control panel on the connector C01/3 Pin 3c. Yellow/red.
Mazda RX-7 Turbo 1992 1996 High on drivers kick panel at cruise control brain. Brown.
Mazda Xedos 6 1992 "The white, 12 pin connector has the speed pulse signal at pin 2 and is above the fuse box on the driver side at the door post." Green/red.
Mazda Xedos 6 1992 Behind the control panel on the white 14 pin connector Important: There can be several cables with the same colour for the speed signal.
Mazda Xedos 9 1993 In the fuse unit on the connector JB-01. Green/red. Important: There can be several cables with the same colour for the speed signal.
Mazda Xedos 9 1993 1998 "The speed pulse signal is located at pin 3 of the green connector at the fuse box in the driver kickwell, at the door post." Green/red.
Mercedes E220 cdi 2000 the colour is Green/Yellow and is located under the passenger side kick panel in the cable routing loom.
Mercedes Benz 212D Sprinter 1996 There is a black 9 pin connector behind the speedometer. The blue/black cable carries the signal. Blue/black. "At some vehicles, pin 9 is not connected. It has to be connected with a special contact pin. The rectangular signal comes out of the combi-instrument-case."
Mercedes Benz 212D Sprinter 1995 The blue/black cable behind the speedometer carries the signal. Blue/black.
Mercedes Benz 220E 1991 1995 "The location is in a black, single pin connector at the rear of the speedometer." Green/yellow. "There are different cable colours at this location green/black, green/yellow or Yellow/green. The addition of a hall generator at the speedometer is possible. (Mercedes Benz order number: 0075422917)."
Mercedes Benz 230E 1995 1997 Behind the instrument panel on the left side (looking from the seat) is a black connector. The green/white cable carries the signal. It may be available at the ISO radio connector also. Green/white. "If the car is prepared for a BECKER Radio, the speed pulse cable is fastened back to the harness."
Mercedes Benz 230E 1995 1997 "All models of this series have preparation for a radio pre-installed by the manufacturer, with the speed pulse at the radio connector." Grey/black. "If there is preparation for a BECKER Radio, the speed pulse cable is fastened back to the wiring harness."
Mercedes Benz 260SE 1988 1991 "The speed pulse signal is at pin 2 of a black, 8 pin connector located behind the instrument panel at the rear of the speedometer." White.
Mercedes Benz 300E 1991 1995 "There is a black, one pin connector with the speed pulse signal at the rear of the speedometer." Green/yellow. "There are different cable colours at this location green/black, green/yellow or Yellow/green. The addition of a hall generator at the speedometer is possible. (Mercedes Benz order number: 0075422917)."
Mercedes Benz 300S 1988 1991 "Behind the speedometer is a black, 8 Pin connector. Use the pin connected to a white wire." White.
Mercedes Benz 814D 1999 The speed signal can be found on a Green/Red wire connected to the Yellow connector block on pin 7 at the rear of the Tacho. Green/Red
Mercedes Benz A140 - A170 1997 "Standard equiped with GAL at radio connector. Chamber A, pin 1 carries the signal." ?
Mercedes Benz A-Class A168 1997 On the radio ISO connector A Pin 1. Green/black.
Mercedes Benz Actros 1998 On the tachograph yellow connector X2 Pin 8. Green/black. Important: There is no ground potential on the chassis. Some cars have CAN - Bussystem. It is necessary to fit a wheel sensor.
Mercedes Benz Actros 1997 "At the FR (FMR) module, connector X4, there is a speed signal input from the tachograph. This signal must be used as an input to an amplifier and one of the outputs fed to the FR module" Green / Red The amplifier is a specification of Daimler Chrysler. If it is not used problems and fault codes will begin to appear on the engine management system
Mercedes Benz Actros You can find the PSM-unit in the fusebox. It's the 4th controller-unit from the top. The left 18 pin connector (X1) at pin 8 carries the signal. ? "If no PSM-unit exists, it can be retro fitted."
Mercedes Benz Atego 1998 "Pin D3 on the 1318 tachograph
Alternatively, the FR (FMR) module, connector X4, there is a speed signal input from the tachograph. This signal must be used as an input to an amplifier and one of the outputs fed to the FR module" The amplifier is a specification of Daimler Chrysler. If it is not used problems and fault codes will begin to appear on the engine management system
Mercedes Benz Atego 1998 On this vehicle it is only possible to mount a wheel sensor. Important: The power supply for the computer can only connect to the several fuses in the fuse box. (CAN - Bus System).
Mercedes Benz C 280 Mod.94 1994 At the radio connector. Green/white.
Mercedes Benz "C, E, CLK Mod.99" 1999 "The speed pulse can be found on the small connector of the ETS black box (usual position in the engine compartment) at pin n°3 wire colour Black/Green, the signal can be found also inside the car in the loom plastic compartment under the passenger carpet," Black/green.
Mercedes Benz C180 1993 1997 "In all models of this series the location of the speed pulse is in the front of the wire tray, near the front right hand side door post. It may also be available at the ISO radio connector." Green/white. "If a radio preparation is pre-installed by manufacturer, all models of this series have the signal at pin 1 of chamber 3 of the ISO-connector. If there is another connector (Becker connector) the wire with speed pulse signal is bound back at the wiring h"
Mercedes Benz C220 1993 1996 "Behind the instrument panel at the speedometer is a black, 20 pin connector. The signal is at pin D 2. It may be available at the ISO radio connector also." Green/white. "If a radio is pre-installed by manufacturer, all models of this series have the signal at pin 1 of chamber 3 of the ISO connector chamber. If there is another connector (Becker connector) the wire with speed pulse signal is bound back to the ignition bra"
Mercedes Benz C220 1993 1996 "Below the right door post in the front, a connection plate is available. It may also be available at the ISO radio connector." Green/white. "If a radio preparation is pre-installed by manufacturer, all models of this series have the signal at pin 1 of chamber 3 of the ISO-connector. If there is another connector (Becker connector) the wire with speed pulse signal is bound back at the wiring h"
Mercedes Benz CLK 200 - CLK 430 1999 "In the passenger's footwell there are 2 green/black cables connected together with a clamp. These cables carry the signal. OR: driver's side, under scuff plate (sill), there are two cables, colour blue-grey (not exactly blue, but more bluegrey). One of th" Green/black.
Mercedes Benz CLK 230 Kompressor 1997 At the radio connector (ISO) use pin 1 in chamber 3. Green/violet.
Mercedes Benz CLK W208 1997 ON the radio ISO connector A Pin 1. Green/white.
Mercedes Benz E 200 2000 "The speed signal can be found in the passenger kick panel, towards the back there is a Green/Black wire." Green/Black
Mercedes Benz E200 Compressor At ISO-Radio connector Green/black. "If the car is prepared for a BECKER Radio, the speed pulse cable is fastened back to the harness."
Mercedes Benz "E240 (E200 - 430, Mod.99)" 1999 "In the engine compartment, left hand side, near the windscreen, there is a black box (with airconditioning sticker on it). Remove the cover. At the ESP- Module (or ASR-Module), there are 2 big connectors and 1 small one. The left one carries the signal at" Green/white. "The signal can be found too, in the passenger's footwell (left hand drive vehicle): green/white cable (in harness with green double-cable) behind toeboard. OR: 2 lone green/black cables, soldered together at their ends, behind vertical cover of passenger'"
Mercedes Benz E-Class
Mercedes Benz G300 1990 "In the driver's footwell, above the lever for the bonnet, there is a 3 pin connector with the cable colours black, brown and grey/green. The grey/green cable carries the signal." Grey/green.
Mercedes Benz G300D 1996 1997 "In the engine compartment, passenger's side, below the big cover, at splash wall, you can find the ABS-controler. Pin 5 carries the signal." Grey/green.
Mercedes Benz G320 1997 On the radio ISO connector A Pin 1. Green/white.
Mercedes Benz G320 S 1991 1998 "All models of this series have a radio-preparation pre-installed by the manufacturer with the speed pulse at the radio connector.
Location: Driver's footwell at center console. There are 3 connectors. The back one with 6 pins carries the signal." Green/black.
Mercedes Benz G500 1993 "At the speedometer there are 3 cables: green/yellow, black/blue and brown. The green/yellow one carries the signal." Green/yellow.
Mercedes Benz G-Class "Vehicles with display of exterior temperature: Rear of speedometer, lower part, there is a green/white cable carrying the signal" Green/white.
Mercedes Benz MB 814 Mod. 1996 1996 There is a speedometer with tachograph without any connector. A cable with 4 cores goes into the speedometer. It comes out of a metallic hose. White.
Mercedes Benz MB 814 LKW "All models are equiped with VDO-Kienzle tachograph. At these tachographs, there are type designations: 1311-37=mechanical tachograph, 1311-27=mechanical tachograph with speedpulse signal at exit C pin 3, 1314=electronic tachograph with speedpulse signal a" --
Mercedes Benz M-Class 1999 Remove cover of fusebox. Remove the 5 torx screws of ESP-module cover. Remove cover. Pin 1 of the flat 30 pin connector carries the signal. ? Model-code starting MY00.
Mercedes Benz M-Class 1998 1999 "The M-Class has a CAN-bus. An adaptor is needed. The following parts are required: 1. No.B6 782 25 19, CAN-Adaptor. 2. No.B6 782 25 96, CAN-Adaptor cable. 3. No.B6 782 25 94, Vehicle adaptor cable." White and green. The adaptor has to be connected to the 2 cables of the data bus. They are marked with N78. The cable colours are white and green. These cables are located between the driver's and passenger's seats.
Mercedes Benz M-Class 1998 It is necessary to refit this car with a wheel sensor (EA 1172). Important: CAN - bus - system. CAN - bus adapter. MB - part number : b 67 82 25 19.
Mercedes Benz New S-Class 1998 "At ESP module in the engine compartment. See new E-Class, Mod. 99" CAN-BUS!
Mercedes Benz O 303 Bus 1992 Behind the speedometer. White/black.
Mercedes Benz S420 1993 1998 At the ISO radio connector. Black/yellow/red dots.
Mercedes Benz S-Class W 140 1990 1998 On the radio ISO connector A Pin 1. Green/black.
Mercedes Benz SL 1991 Speed signal is at the back of the radio on the Green/Black wire. Green/Black
Mercedes Benz SL 320 1996 1998 The speed pulse signal is at pin 1 in chamber 3 of the ISO radio connector in the centre console. Green/black.
Mercedes Benz SL 600 1993 1995 "At the back of the instrument cluster there are 2 round and 2 angular connectors. The left, round one (no.1) carries the signal at pin 9." Green/black. If radio connector (ISO) is available (Models from 1994) please use Pin 1 in chamber 3.
Mercedes Benz SLK 230 1996 "In the centre console, behind the radio is a black, 8 Pin connector. Pin 1 has the signal." Green/white. If radio connector (ISO) is available please use Pin 1 in chamber 3. Or: The cable is fixed back at the harness to the radio.
Mercedes Benz Sprinter 210D KA 1995 On the tachograph on the yellow connector B Pin 7. Blue/black.
Mercedes Benz Sprinter 210D KA Automatic 1995 On the control panel on the black connector 1 Pin 2. Important: Only valid for vehicles without tachograph. A sticker on the control panel shows the elec. Circuit. Cable colour and position of the speed signal can vary.
Mercedes Benz Sprinter 323 2001 "At the rear of the instrument cluster there is a white connector indicated as connector 2, on this connector pin 9 has the road speed signal but is blank. You can connect directly to this pin for the road speed signal."
Mercedes Benz Sprinter CDI 416 2001 "At the rear of the instrument cluster there is a white connector indicated as connector 2, on this connector pin 9 has the road speed signal but is blank. You can connect directly to this pin for the road speed signal."
Mercedes Benz V-Class 1996 1999 "At the combi-instrument, the signal is at connector 1, pin 2." Green/white or grey/red. Also valid for type key no. 309 and 308 (2295cc and 2792cc).
Mercedes Benz V-Class & Vito 1996 "At the rear of the instrument cluster: 1. latest version (1999) has a ""magneti marelli"" instrument cluster: White connector no. 2, pin 4 carries the signal. OR: 2. Older version: Connector no. 1, pin 9 carries the signal." "This signal is an outcoming signal (out of the instrument cluster): maybe there is no plug connection (pin is free), then you will have to insert a contact."
Mercedes Benz Vito 2001 "At the rear of the instrument cluster there is a white connector indicated as connector 2, on this connector pin 4 has the road speed signal but is blank. You can connect directly to this pin for the road speed signal."
Mercedes Benz Vito 1996 Behind the control unit on the black 18 pin connector 1 Pin 2 Blue/Black. Important: The speed signal can also be taken from the connector 2 Pin 9 cable colour grey/red. (not modified signal).
Mercedes Benz Vito CDI Mod. 1999 "The signal comes out of the instrument cluster, Connector 2, Pin 4 carries the signal. Pin 4 is not connected, it has to be connected." Valid for MAGNETI MARELLI instrument clusters.
Mercedes Benz Vito LKW 1996 1999 "There is a black 12 pin connector behind the speedometer. Connector 1, pin 9, blue/black cable, carries the signal." Blue/black. At some vehicles pin 9 is not connected. It has to be connected with a special contact pin. The rectangular signal comes out of the instrument cluster.
Mercedes Benz W201 1983 1993 On the control panel on the 1 pin connector Green/black. Important: A signal generator can be fitted to the control panel by the manufaturer.
Mercedes Benz W202 C-Class 1993 On the radio ISO connector A Pin 1. Green/black.
Mercedes Benz W210 E-Class 1995 On the radioISO connector A Pin 1. Green/black. Important: At vehicles with CAN - Bus system the speed signal cable (green/black) is in the legroom on the passenger's side on the 2 Pin connector.
Mitsibishi Shogun Sport 2002 " Located on the lower driver's side dashboard, diagnostic connector, 16 pin plug, pin 14, yellow and white wire."
Mitsubish Shogun Sport 3.0 V6 2001 The speed signal can be found at the rear of the instrument cluster on the black connector. The wire colour is Yellow/White with silver bands. Yellow/White with Silver bands
Mitsubishi 3000GT 1992 1995 Behind instrument cluster. Or behind Radio in the centre console (ECM). Yellow/white. "The SRS light lit up after the instrument cluster was reinstalled, so it is recommended tapping onto the speed pulse line behind the radio. The SRS light will light up if the instrument cluster is removed with the key on. If any other warning lights appea"
Mitsubishi 3000GT Z 10 1992 On the control panel. Yellow/white.
Mitsubishi Camry 1997 Behind the glove compartment on the white 19 pin connector Green.
Mitsubishi Carisma 1996 1999 "At the left hand side of the glove box is a white/grey, 18 pin connector. Pin 11 is the speed pulse signal." Orange.
Mitsubishi "Carisma 2,0 GLS" 1997 On the ECU on the right 22 pin connector Lower row 5th pin from the left. White/green.
Mitsubishi Colt 1995 1996 "At the left hand side of the glove box is a white, 13 pin connector. Pin 12 is the speed pulse signal." Yellow.
Mitsubishi Colt C10 C50 1995 In the legroom on the passenger's side on the white 13 pin connector. Pin 12
Mitsubishi Diamonte 1995 Behind lower dash panel high in the drivers kick panel. OR: Instrument cluster Yellow/white.
Mitsubishi Eclipse 2000 1995 1996 Behind the instrument cluster. Or: ECU behind the radio. Yellow/white. The easiest place to tap onto both the speedpulse is behind the instrument cluster. It is important to make sure that the key is not in the on position when removing the instrument cluster.
Mitsubishi Eclipse D20 1995 In the legroom on the driver's side on the black 16 pin diagnostic connector Pin 14. Yellow/white.
Mitsubishi Eclipson 1995 1996 "At the driver side, in the kickwell, at the fuse box is a black, 16 pin diagnostic connector. The speed pulse signal is at pin 14." Yellow/white.
Mitsubishi Expo 1995 Above left of fusebox. OR: Instrument cluster Yellow/white.
Mitsubishi Galant 1999 Remove the instrument cluster and turn over. On the back connect to the terminal with SI printed next to it.
Mitsubishi Galant 1996 1996 "On the front passenger side, at the left hand side of the glove box is a white, 22 pin connector. Pin 3 is the speed pulse signal." Yellow/white. "Export model: Same connector, pin 2, cable colour yellow/red carries the signal. (info from Belgium, 08.Nov.1997)"
Mitsubishi Galant Limousine 1996 On the radio connector Pin 9 White/blue. Red/green. In the doorsill on the driver's side.
Mitsubishi Galant Model 1997 1998 Behind the instrument panel there is a 17 pin connector. Pin 5 (pin25 according to wiring diagram) carries the signal. White/blue. "Other locations: at radio, same cable colour. Centre console, at diagnostic connector, same cable colour."
Mitsubishi Galant Model 1995 Behind the factory speaker in the dash on the driver's side. OR: engine control module in the center console. Yellow/white.
Mitsubishi Galloper 1999 On the control unit on the 18 pin connector
Mitsubishi L200 2001 The speed signal can be found at the rear of the instrument cluster on the black connector. The wire colour is yellow/White with silver bands.
Mitsubishi L200 1999 "At the diagnostic connector, under the steering wheel column, cable colour Yellow/white.." Yellow/white.
Mitsubishi L200 1993 On the control panel on the 1 pin connector
Mitsubishi L300 1995 The speed pulse is behind the speedometer at a single pin connector. Blue.
Mitsubishi Lancer 1995 1996 "At the left hand side of the glove box is a white, 13 pin connector. Pin 12 is the speed pulse signal." Yellow.
Mitsubishi Lancer CAO In the legroom on the passenger's side on the black 16 pin connector Pin 14. Yellow/white.
Mitsubishi Lancer GLXi 1992 1996 "At the left hand side of the glove box is a black, 16 pin connector. Pin14 is the speed pulse signal." Yellow/white.
Mitsubishi Pajero 3 1998 On the control panel on the connector C 07 Yellow/white. Important: Speed signal alternative: On the white 32 pin connector Below the radio Pin 30 on the blue cable.
Mitsubishi Pajero V6-3000 1995 1996 "At the driver side, in the kickwell, at the fuse box is a black, 16 pin diagnostic connector. The speed pulse signal is at pin 14." Yellow/white.
Mitsubishi Shogan 2.5 TD Sport 2002 "Located on the lower driver's side dashboard, diagnostic 16 pin connector, Pin 14" Yellow / White
Mitsubishi Shogun The speed pulse wire is located at the back of the instrument panel at a 2 pin plug. The wire colour is Blue. Blue.
Mitsubishi Shogun DI 2001 Behind the instrument cluster on the A connector pin No.6 wire colour is white/Blue. White/Blue
Mitsubishi Sigma 1996 In the fuse box on the white 11 pin connector Pin 10 Yellow/white.
Mitsubishi Sigma 3.0 V6 1991 1996 "In the driver side kickwell, at the fuse box is a white, 11 pin diagnostic connector. The speed pulse signal is at pin 10." Yellow/white.
Mitsubishi Space Gear 1995 1996 "Under the glove box is the engine control unit. The first grey, 22 pin connector has the speed pulse signal at pin 16." Yellow/red. "Caution: There are two cables with the same colour, refer to the pin number."
Mitsubishi Space Gear 1995 Behind the glove compartment on the 18 pin connector Pin 17.
Mitsubishi Space Runner 1996 1996 "On the front passenger side, at the left hand side of the glove box are two white, 8 pin connectors. One of them has the speed pulse signal at pin 1." Yellow/white.
Mitsubishi Space Runner 1996 Behind the glove compartment on the 8 pin connector Pin 4. Yellow/white.
Mitsubishi Space Wagon 1998 At driver's side there is a fuse box left above. There is a 10 pin connector with 3 white/blue cables. The cable in the right above corner carries the signal. ( a little bit behind the other cables) White/blue.
Mitsubishi Space Wagon 1996 1996 "On the front passenger side, at the left hand side of the glove box are two white, 8 pin connectors. One of them has the speed pulse signal at pin 1." Yellow/white.
Mitsubishi Space Wagon 1998 On the Engine control unit on the passenger's side on the 20 pin connector Yellow/white.
Neoplan Cityliner "There is a VDO-Kienzle Speedometer. Connector B, pin 7 or connector C pin 3 carries the signal." Black/red. There is mostly a description below the speedometer.
Nissan 200 SX 1994 All models of this series have the signal at the central connector behind the fuse box. The location within the connector can vary. Yellow/green.
Nissan 300 ZX 1995 On the control panel on the black 12 pin connector. Yellow/red.
Nissan 300 ZX 1990 1995 "On the back of instrument cluster, cable colour Yellow/green.. OR, different info: Behind the speedometer, yellow/red cable at a 12 pin connector." Yellow/green or yellow/red.
Nissan Almera 2001 "The speed signal is behind the radio, at the big 16 pin connector. The speed signal is on pin 4, wire colour is Purple/Red." Purple/Red
Nissan Almera 16V SLX 1.6 1995 1998 "A white 20 pin connector is located in the centre console, at the front passenger side above the transmission tunnel. The speed pulse is at pin 18." Violet/red.
Nissan Almera N 15 1995 In the center console on the white 20 pin connector. Pin 18. Violet/red.
Nissan Altima GXE 1995 Behind instrument cluster. Yellow/green.
Nissan LKW L60.095 1991 The signal is available behind the speedometer at pin 8 of the second connector from the left hand side (viewed from above). White. "This cable colour can vary, because this is no standard wiring harness."
Nissan Maxima 1992 1995 In all models of this series the signal can be picked up at the central plug behind the fuse box. The plug position can vary with model. Pay attention to the cable colour. Light-blue.
Nissan Maxima QX 1995 1997 All models of this series have the speed pulse signal at pin 15 of a 20 pin connector located in the centre console on driver side. Pink/blue.
Nissan Maxima QX 3.0 V6 1997 At the rear of the speedometer there are 3 different white connectors. The smaller one carries the signal at the pink cable with blue dots. Pink with blue dots.
Nissan Maxima V6 24V QX 1994 On the white 20 pin connector Of the control unit behind the console. Pink/blue.
Nissan Micra 1998 At the rear of the instrument cluster there is a 28 pin connector. Pin 16 carries the signal. Yellow/blue.
Nissan "Micra 1,3 Super S" 1994 On the control panel on the white 12 pin connector Pin 12 Yellow/blue.
Nissan Pathfinder 1998 Between the steering wheel and console in the connector M3; 2nd cable on the right. White/blue.
Nissan Pathfinder 3.3 V6 1998 "Between centre console and steering wheel there is a connector (M32). In the connector's lower row of cables, the 2nd cable from right carries the signal. OR: On back of instrument cluster." White/blue.
Nissan Patrol 1988 1998 "In the engine compartment, at the passenger side there is an 8 pin connector close to the engine block (depends on engine specification)." Light-blue. "You can find the location in all engine types, at a cable harness with some connectors, near the engine block."
Nissan Patrol 2 1998 On the control panel on the 10 pin connector Pin 1 Grey.
Nissan Patrol Diesel 1988 1998 The signal is at pin 3 of a white 12 pin connector behind the speedometer. Light-blue.
Nissan Patrol GR 1998 1998 On the control panel on the white connector Marking 2P on the printed board.
Nissan Patrol GR Diesel 1988 1998 "Behind the speedometer there is a white 10 pin connector, right hand side, the very outside pin, cable colour grey. OR: at the gearbox, cable colour grey" Grey.
Nissan Pick up MD 21 1991 On the control panel on the 10 pin connector N4 Pin 10. Red/blue.
Nissan Prarie 1992 1995 "The speed pulse in this series is behind the speedometer at pin 3 of a 10 pin connector. The signal is present at this point, even when no cable is attached." Yellow/red.
Nissan Primera 1996 On the control unit in the console on the 18 pin connector Pin 2 Yellow/green.
Nissan Primera 1992 1996 "The speed pulse is located within an 18 pin connector in the centre console, at the height of the glove box, on the passenger side." Yellow/green.
Nissan Primera SRI 1996 "In the centre console, next to the engine control unit are two white connectors. The 16 pin connector has the signal at pin 2." Yellow/green.
Nissan Quest 1994 High in the passenger kick panel at ECU. The lower dash panel must be removed. OR: behind instrument cluster (black 12pin) Green/yellow. It is easier to tap into the wires behind the instrument cluster. Be careful when pulling out the cluster because there is a cable for the gear indicator hooked to it.
Nissan Sentra 1995 Behind instrument cluster. Purple/red.
Nissan Serena 1993 In the legroom on the passenger's side on the 14 pin connector Pin 2. Yellow/green.
Nissan Serena 1993 1995 "At the kickwell on the front passenger side close to the door post, at pin 2 of a 14 pin connector to the engine air-conditioning control unit." Yellow/green.
Nissan Sunny 1993 1995 "In this series, the speed pulse is in a white, 20 pin connector, located behind the speedometer. The location in the connector depends on the instruments fitted - (with tachometer pin 8, without tachometer pin 6)." Yellow/green.
Nissan "Sunny N14, Y10" 1993 On the control panel on the white 10 pin connector Pin 6. Yellow/green.
Nissan "Terrano 2,7 D" 1993 On the gear box sensor in the console in the front of the gear switches White/blue.
Nissan "Terrano 2,7 D" 1990 1996 "The central connector is located at the fuse box behind the dashboard, in the driver side kickwell. The location can vary within this connector." White/blue.
Nissan Terrano II 1993 1996 "The signal can be found at the engine control unit, within the centre console, close to the gear lever. Even with different engine specifications, the position stays the same. For diesel engines the signal is at pin 11, for petrol at pin 32." Yellow/black. For diesel engines the cable colour is white/blue.
Nissan Terrano II Turbo Diesel 1997 "The signal can be found at the engine control unit, within the centre console, close to the gear lever. Even with different engine specifications, the position stays the same. For diesel engines the signal is at pin 11, for petrol engines at pin 32." Yellow/black. For diesel engines the cable colour is white/blue.
Nissan "Terrano II, R20 2.7 Tdi" 1996 The white/blue cable of the main harness between instrument cluster and ECM carries the signal. Pin 26 at ECM. White/blue. This is the only location to find the rectangular shape of signal.
Nissan "Terrano II, R20 2.7 Tdi" 1996 There is no digital speedpulse signal available. A hall generator from VDO-Kienzle has to be retro fitted. Part No. X39397106191.
Nissan Trade 3.0 Transporter 1995 "Depending on the engine specification, the signal is either at the 12 pin connector to the instrument panel or in the front passenger side kickwell, behind the windscreen washer reservoir." Red/blue.
Opel Kadett E GSI 1991 On the engine control unit in the legroom on the passenger's side. Blue /red.
Opel Kadett manual transmission No speed pulse available. A hall generator has to be retro fitted. Part no. 1236262. "For all ""old"" Opel models there are hall generators to retrofit at VDO. Please ask for part no. at VDO. Information about year of manufacturing, type and kind of gearbox are required."
Opel old models "For all ""old"" Opel models there are hall generators for retro fitting from VDO. Please ask for part no. at VDO. Information about year of manufacturing, type and kind of gearbox are required." If radio connector (ISO) is available please use Pin 1 in chamber 3
Opel Vectra 1991 1994 "The speed pulse signal is at the engine control unit connector in the front passenger kickwell, at the left door post under the glove box." Blue/red. If a radio connector is available use the blue/red wire. The cable colour of all models from this manufacturer is blue/red. A second location is at the connector board under the engine control unit. Pay attention to the cable colour.
Opel Vectra A 1991 1994 "The speed pulse signal is at the engine control unit connector, in the passenger front kickwell, under the glove box, at the left hand door post." Blue/red. If a radio connector is available please use the blue/red wire. The cable colour of all models from this manufacturer is blue/red. A second location is at the connector board under the engine control unit. Pay attention to the cable colour.
Opel Vectra A 1991 1995 On the radio ISO connector A Pin 1. Blue/red.
Peugeot 106 2001 Rear of instrument cluster 18 way black connector pin 18 has the road speed signal Green No.465
Peugeot 106 1996- On the ECU on the black 57 pin connector Pin 19. Green.
Peugeot 106 EQUINOXE 1993 1996 "In the engine compartment at the left hand side of the engine is an electronic box. The signal is at pin 19 of the black, 57 pin connector." Green.
Peugeot 106 Green 1991 1994 No speed pulse signal!
Peugeot 206 2002 "Flat 6-way Grey Connector left hand side of the fuse box driver side pin 1, wire color white with the number 6739."
Peugeot 206 2001 Rear of instrument cluster on the yellow 26 way connector. The speed signal is at pin 25 wire colour Orange No.465 Orange No.465
Peugeot 206 2001 "The speed pulse for all 206's can be picked up at the following.
Behind the battery on the RHS is a ""Black Box"" remove the cover. The box houses fuses and connectors, locate the black 16 way connector. The speed signal is on pin 14 and the wire number is 6739." 6739
Peugeot 206 1999 "Behind the instrument cluster, on the Yellow 26 pin connector pin no.25. Blue wire with number 465" Blue 465
Peugeot 206 Coupe 2l (Full Multiplex) 2001 "In the engine compartment behind the battery there is a black box (contains fuses), located here is a black 16 way connector. On pin 14 there is the speed signal. Wire colour is Yellow but can change and is always numbered 6739.
This information is for the full multiplexed 2 liter coupe, to determine whether the vehicle is full multiplexed the shape of the key phob will be square, if not it will be round." 6739
Peugeot 306 2001 Rear of instrumnet cluster on the Yellow 26 way connector at pin No.2 wire colour Orange No.465 Orange No.465
Peugeot 306 1998 On the control panel on the yellow 26 pin connector Pin 2 cable nr. 465. Grey.
Peugeot 306 1993 1996 "In the engine compartment is an electronic box near the battery. The signal is at pin 8 of a black, 35 pin connector. The cable number is 1360." Green. "The cable colour can change, therefore it is safer to look at the location in the connector, than for the colour."
Peugeot 306 1993 1997 On the ECU on the black 35 pin connector Pin 8. Green.
Peugeot 306 TD 1997 1999 At rear of the speedometer is yellow 26 pin connector. Pin 2 carries the signal. Grey.
Peugeot 306 TD 1993 1997 No speed pulse signal!
Peugeot 306 TD The speed pulse is behind the instrument cluster at a Yellow 32 pin connector. Pin 2 has a Grey wire (465) which carries the speed pulse signal. Grey.
Peugeot 307 2001 "The speed signal can be taken from the ABS box. Remove the front bumper and the ABS box is on the near side.1/ On the 31 way connector at pin 22 is the speed signal, wire has the number 6739 printed on it. 2/ on some cars there may be a 26 way connector, in this case the signal is on pin 23 with cable number is 6739. 3/ Unlikely in the UK but you may find a 42 way connector, the speed signal is on pin 33 wire number is 6739." 6739
Peugeot 307 2001 The speed signal can be found in the wiring loom between the Battery and the front headlight. The wire is Numbered 6739. 6739
Peugeot 309 " At the gear box in the engine compartment there is the speedometer cable and normally a speed pulse generator with three wires on it. The speed pulse is at position 3. If the car is not equipped with this generator you can order it a PEUGEOT dealer, the " ?
Peugeot 405 SRI X4 1992 1994 No speed pulse signal!
Peugeot 406 2001 "The speed signal is at the BCI, Situated behind the trim panel above the drivers pedals. The speed signal is on a 26 way Yellow connector at pin No.2 wire colour Beige No.6739C" Beige No 6739C
Peugeot 406 1995 "On the control panel, yellow 26 pin connector Pin 21." Grey.
Peugeot 406 (D9) 2000 "Behind the drop down flap above the drivers padals, is the BCI-ECU. The road speed signal can be found on pin 2 of the 26 way connector."
Peugeot 406 1.8 LX The wire goes directly from the gearbox sender unit to the instrument cluster. The colour of the wire is unclear but it has the number 1622 written on it. It can also be found at the rear of the clutch housing (only accessible from underneath the car) at 1622 or yellow.
Peugeot 406 Coupé 1997 There are 2 connectors behind the speedometer. The yellow oe has 26 pin. The grey cable of this connector carries the signal. This cable is marked with the no. 465. Grey.
Peugeot 406 D "In the engine compartment at the left side of the engine is an electronic box. The signal is at pin 9 of the black, 57 pin connector. The colour of the signal wire is yellow." Yellow.
Peugeot 406 HDI 2001 "The speed signal can be found at the ABS ECU at pin 22, wire number is 4739. The wire goes to the CD player ECU." 4739
Peugeot 406 ST 1995 1998 "In the engine compartment at the left hand side of the engine is an electronic box. The signal is at pin 19 of the black, 57 pin connector." Red.
Peugeot 605 1991 On the control unit on the passenger's side on the 9 pin connector Pin 5. Brown (Nr 131).
Peugeot 605 Sri 1990 1994 "1. Some vehicles are equipped with a signal: Passenger side below glove box, there is a small black plastic box with a rubber protected 9 pin connector. The purple cable , no. 131F carries the signal. 2. If there is no speed pulse signal available, a hall" Sometimes there is a cable present but there is no speed pulse signal.
Peugeot 607 2001 Locate the O.E. navigation multiplug behind the trim panel in the boot at the near side. This may be either a 18 way white connector or a 26 way Blue connector dependant upon the level of multifunction display fitted. The speed signal is on pin 12 of the 18 way connector or Pin 3 of the 26 way connector. Wire colour is the same Yellow No.6739 Yellow 6739
Peugeot 806 2001 Rear of the instrument cluster on the 26 way blue connector pin No.9 wire colour Green No.1622 Green 1622
Peugeot 806 2000 "Behind the instrument cluster on the yellow 26 pin connector, pin 24 wire number 428" cable No 428
Peugeot 806 1997 "At a BOSCH-ECM, the signal can be at pin9. The cable colour can vary." Green.
Peugeot 806 1994 1998 "In the engine compartment, on the right hand side, between the wheel housing and the radiator grille there is a black 35 pin connector for the engine control unit. The signal is at pin 27." White. The cable colour can change. Therefore it is safer to look at the location in the connector than for the colour.
Peugeot 806 1994 On the ECU on the black 35 pin connector Pin 27. White. Important: Speed signal alternative: on the control panel on the blue connector on the green cable.
Peugeot 806 "Vehicles WITHOUT Bosch ECU: At the gearbox there is a 3 pin connector. On cable is +12V, one is ground, an the other one is the speedpulse. To find the connector, you have to remove the bottom cover of the gearbox. Loosen about 10 screws." You can lay the cable very easily under the floor of the driver's seat.
Peugeot 806 STDT 1995 1998 No speed pulse signal!
Peugeot Boxer D 1996 No speed pulse signal! A Speed Sensor unit is available from France Peugeot part No: 616035 allow at least 3 days for delivery.
Peugeot Boxter 2001 No speed signal on this vehicle. But Peugeot do Pulse generator part No.VAS870. xxxxx
Peugeot Expert 2001 "Behind the instrumnet cluster on the 26 way blue connector, at pin No.9 wire colour Yellow No.1622" Yellow No.1622
Peugeot Expert 1996 "At the instrument panel, behind the speedometer, is a blue connector. Pin 2 has the signal." Green. The number on the cable is 465.
Peugeot Expert Behind the instrument cluster on the green 9 way connector pin 1 cable No. 1622 Cable No. 1622
Peugeot Partner 2001 Remove the trim above the drivers pedals to gain access to the BCI unit. The road speed signal can be found on the 26 way Yellow connector at pin No.2 wire colour is Blue No. 465 Blue No.465
Peugeot Partner Behind the instrument cluster on the blue 7 way connector pin 2.
Peugeot Partner 1.8D 1996 1998 "Behind the instrument panel at the speedometer is a blue, 7 pin connector. Pin 2 has the signal." Green. The number on the cable is 465.
Peugeot Partner 1.8D 1996 On the controlpanel on the blue 7 pin connector Pin 2 (Nr. 465). Green.
Pontiac Parisienne 1986 "In the passenger kickwell, at the ""A"" post, is a black, 14 pin connector. Connect to the brown wire." Brown. Note: there is more than one brown cable at the connector.
Pontiac Trans Sport 2.3i Above to the right of footwell there is the ECM-module. The connector C2 carries the signal at pin B8. Green.
Pontiac Trans Sport 3.1i "Behind the steering wheel column, there is the cruise control. There are 4 cables in a connector. They are 2 x grey, red, & pink with white stripes. The red cable carries the signal." Red.
Porsche 911 964 1991 1993 On the control panel on the black 8 pin connector. Pin 4. Green.
Porsche 911 Carrera 4 1998 "Radio connector, pink/grey cable, 0,5mm diameter, OR: Instrument cluster, same cable colour" Pink/grey.
Porsche 928 1991 1995 In the front passenger side kickwell there is a fuse board below the footrest panel. This board contains the yellow distribution connector P. The speed pulse signal is at pin 5. Brown/red.
Porsche 928 1986 1989 "1. Cruisecontrol unit, pin 11, cable colour brown/red. You can find the cruise control unit in the central console, front side. 2. There is a 14 pin connector T19 next to the central-electric unit. Pin 4, cable colour brown/red." Brown/red.
Porsche 928 1991 In the fuse box on the brown 10 pin connector O Pin 1. Blue/red.
Porsche 928 GT 1989 1991 In the front passenger side kickwell there is a fuse board below the footrest panel. This board contains the brown distribution connector O. The speed pulse signal is at pin 1. Blue/red.
Porsche 928 GTS 1992 1995 In the fuse box on the yellow 10 pin connector P Pin 5. Brown/red.
Porsche 944 Turbo "At the handbrake, below the carpet, there is the main harness. The signal is at the blue/red cable. OR: At speedometer, blue/red cable." Blue/red. It's very difficult to remove the speedometer.
Porsche 996 1998 On the black Radio connector A Pin 1. Green/pink.
Porsche 996 1997 "Behind the instrument cluster, at 2nd connector, Pin 16." White/brown. "PS-System only works at the position above described. How to disassemble: Left of Speedometer, there is a small microphone grid. Remove the screw behind. Right of speedometer, pull away to the front the warning flasher switch (it moves very hard). Loos"
Porsche Boxster 1997 On the control panel on the blue connector Pin 13. Grey/pink.
Porsche Boxster 1996 "On the driver side of the boot, at the firewall is a blue, 21 pin connector. Pin 1 has the speed pulse signal." Black/white. "Alternative: In the front boot, at ABS-controler unit, Pin 23, cable colour brown/white."
Porsche Carrera II 1991 1998 "In this series the location of the speed pulse is behind the speedometer at pin 4, of a black, 8 pin connector." Green. The speedometer can easily be drawn out from the dashboard.
Proton 416 GLXi 1995 "On the right hand side of the glove box is a white, 22 pin distribution connector. The speed pulse is at pin 14." Yellow/white.
Renault all Trucks "Behind the speedometer, cable No. 59 carries the signal." none "In some cases the signal becomes too weak, when an additional system is connected to it. You will need to use a signal amplifier. Please test if all systems work well."
Renault Berlingo 2001 At the BSI unit and the Instrument cluster at pin 2 of the 26 pin Yellow connector.
Renault Clio 1994 1995 "In the kickwell, on the driver side, at the left side of the steering column there is a colourless, 3 pin connector. The location of the signal is at the middle pin." Beige/blue. The cable colour can change. Therefore it is safer to look at the location in the connector than for the colour.
Renault Clio B/C 1991 Under the steering wheel in the white 3 pin connector Pin2. Yellow.
Renault Clio II 1998 "Remove steering wheel column cover, seals of doors, ""A"" post covers and dashboard. At the backside of the instrument cluster, there is a black 10 pin connector. Pin 8 carries the signal." Purple.
Renault Clio RN 1.2 1994 1995 "Under the steering column is a white, 3 pin connector. The signal is at the centre pin." Yellow.
Renault Clio RN 1.9D 1991 1994 No speed pulse signal! There is a cable present but there is no speed pulse signal.
Renault Espace 1999 "In the engine compartment, driver's side, between headlight and MacPherson strut tower there is a black plastic box. There are 2 connectors, the lower one has 4 chambers. The signal is in chamber B (black) at pin 5. Cable colour is orange/blue or orange/b" or/blue or or/black. 2nd location is the signal for the radio.
Renault Espace 1993 1995 "In the engine compartment, on the left hand side, between the wheel housing and the headlight, there is a rectangular, black box containing the engine control unit. The signal is at pin 3 of the black, 35 pin connector." Brown/blue. The cable colour can change. Therefore it is safer to look at the location in the connector than for the colour. Renault’s order number for a speedometer cable with hall generator is: 6025171365.
Renault "Espace 2,01 Benzin" 1999 In the fuse box in the black box on the blue connector Pin 17. Orange/brown.
Renault "Espace 2,21 Diesel" 1998 Behind the fuse box on the passenger's side on the 26 pin connector F Pin 17. Orange. Important: The radio is under the passenger's seat. The mute connection can be refitted.
Renault Espace 3l V6 (pre Databus) 1998 Behind the digital display on the brown connector pin 26 Light Orange Light Orange
Renault Espace D 1993 1996 No speed pulse signal! Renault’s order number for a speedometer cable with hall generator is: 6025171365.
Renault Espace V6 1997 Behind the control panel on the 30 pin connector In the black part. Pin 26. Orange/green. The radio is under the passenger's seat. The mute connection can be refitted.
Renault Europa 1988 1995 At the driver side in the legroom close to the pedals. Yellow/blue.
Renault Express (Rapid) D65 1996 1997 No speed pulse signal!
Renault Express 1.2 RL 1995 No speed pulse signal! There is a cable present but there is no speed pulse signal.
Renault J66 "Behind the central display on dashboard, there is a brown/black connector. Pin 26 carries the signal." Orange/green. "Remove the upper part of dashboard. For that you have to remove both speaker's grilles. Under each grille, there is one screw. Unscrew them. The connector is behind the display. Caution: Cable colours can change."
Renault Kangoo 1998 "Behind the instrument cluster. Connector N, pin 8 carries the signal." Salmon/black.
Renault Kangoo 1998 On the control panel on the black connector Pin 3. Pink/black.
Renault Kangoo Van 2000 Behind the instrument cluster on the 30 way grey connector. Pink wire on pin 23. Pink
Renault Laguna 1999 Behind the instrument cluster on the L.H. plug pin 14 Brown/White wire. Brown/White
Renault Laguna 1996 On the control panel on the grey 30 pin connector Pin 5. Yellow. Important: Speed signal alternative: >9/98 on the control panel on the grey/black connector pin 14 cable colour white/brown.
Renault Laguna 1994 A speedometer shaft with hall generator can be retro fitted. The Renault reference is 77 00 410 338. All vehicles can be retro fitted.
Renault Laguna 1994 1996 "In the kickwell, on the driver side, at the left side of the steering column there is a colourless, 3 pin connector. The location of the signal is at the middle pin." Brown or yellow. The cable colour can change. It is safer to look at the position in the connector than for the colour. The order number from Renault for a speedometer cable with hall generator is: 7700410338.
Renault Laguna 1.9 Dti 1998 "At the rear of the instrument cluster, there is a grey/black (or blue/white) connector, Pin 14 (A2) carries the signal." Brown/white.
Renault Laguna RT 2.0 1994 1998 "In the kickwell, on the driver side, above the steering column there is a grey, 3 pin connector. The speed pulse signal is at the middle pin." Brown or yellow. The cable colour can change. It is safer to look at the position in the connector than for the colour. The order number from Renault for a speedometer cable with hall generator is: 7700410338.
Renault Magane 1999 Behind the instrument cluster on the gery connector pin 23 Gery wire. Gery
Renault Magnum "Directly at the gearbox there is a hall generator with three wires. One is ground, one is the power supply and one is the speed pulse, which goes directly to the tachograph behind the steering wheel. OR: Tachograph Connector C3 or B7, cable no. 59" The speedpulse is also available behind the steering wheel at the tachograph. But it is sealed at this place for security reasons.
Renault Master 2002 "back of instrument panel, grey connector, pin 23 white wire) But on a different Renault Master the colour of the wire was green."
Renault Master 1998 On the control panel on the 10 pin connector Pin 1. Green.
Renault Master D 1998 There is a grey connector at the instrument cluster. Pin 1 carries the signal. Green.
Renault Megane Cabriolet 1997 "In the engine compartment, left side (facing the engine), there is a black box with an electric arrow. Here you can find several connectors (black, white, grey, brown). The black connector carries the signal at pin 4." Grey.
Renault Megane Convertible 1999 Behind the instrument cluster on the black connector block pin 1 Grey wire. Grey
Renault Megane Coupe 1.9 Dti 1999 There is a 69 pin connector at the ECU in the engine compartment. The signal is at pin 43. Grey.
Renault Megane Limousine 1996 "On the control panel, black connector. Pin 1." Grey.
Renault Megane Model 1997 Behind the instrument cluster there is a black 10 pin connector. Pin 1 carries the signal. Grey. "To remove the Intrument cluster, please remove the srews below the loudspeaker left and right side."
Renault Megane RT 1.4L 1996 1999 "In the engine compartment there is an electronic box on the right hand side of the engine. There is a black, 35 pin connector and the signal is at pin 3." Grey/red.
Renault Megane Scenic 1997 Behind the control panel in the black connector. Pin 1. Grey.
Renault R 19 1992 1997 "Under the steering column, at the mechanical speedometer cable is a white, 3 pin connector. The signal is at the centre pin." Violet/grey.
Renault R 19 1991 1994 No speed pulse signal! Renault’s order number for a speedometer cable with hall generator is: 7700840722 and 7700842634.
Renault R 19 1990 1996 "A speedometer shaft with hall generator can be retro fitted. There are 2 different types of shafts, which can be used depending of the model and the year of manufacture of the car. The Renault references are 77 00 840 722 and 77 00 842 634." All vehicles can be retro fitted.
Renault R 21 1986 1995 "A speedometer shaft with hall generator can be retro fitted. There is only one RENAULT reference, 77 00 776 956. This piece corresponds to a hall generator to interconnect between the speedometer and the shaft." All vehicles can be retro fitted.
Renault R19 RN 1.9D 1994 1995 No speed pulse signal! Renault’s order number for a speedometer cable with hall generator is: 7700840722 and 7700842634.
Renault Safrane 1993 1996 "Above the steering column there is a grey, 3 pin connector. The speed pulse signal is at the centre pin." Yellow. The cable colour can change. Therefore it is safer to look at the location in the connector than for the colour. Renault’s order number for a speedometer cable with hall generator is: 7700842723 and 7700845259.
Renault Safrane 1993 "A speedometer shaft with hall generator can be retro fitted. There are 2 different types of shafts, which can be used depending of the model and the year of manufacture of the car. The Renault references are 77 00 842 723 and 77 00 845 259." All vehicles can be retro fitted.
Renault Safrane 1992 "On the radio connector A, Pin 1." White. "Important: If the speed signal isn't available on the radio connector, it is possible to connect on the control panel; blue connector white cable Pin 21."
Renault Safrane 2.0i 1995 1996 "On the side of the steering column is a grey, 3 pin connector. The speed pulse is on the middle pin." Yellow. Renault’s order number for a speedometer cable with hall generator is: 7700842723 and 7700845259.
Renault Safrane 2.2 DT 1996 "The speed pulse signal is available at pin 17 of a blue/black connector at the instrument panel, behind the speedometer." Brown. Renault’s order number for a speedometer cable with hall generator is: 7700842723 and 7700845259.
Renault Safrane 2.5 RXT 1996 Use pin 1 in chamber A of the radio connector (ISO). White. Renault’s order number for a speedometer cable with hall generator is: 7700842723 and 7700845259.
Renault Scenic 2000 Rear of the radio on pin No. 1 of iso conector wire colour is Grey Grey
Renault Scenic Mod.2000 1999 "At the rear of the instrument cluster, there is a crystal connector, Pin 23 carries the signal. OR: Under the front right headlight, there is the ABS unit, Pin 22 carries the signal. (This cable goes directly to the speedometer.)" Grey.
Renault Super 5 "A speedometer shaft with hall generator can be retro fitted. There are 3 different references which constitute a speedometer shaft with a hall generator: 77 01 349 326 for the cable part from the gear box, 77 01 349 327 for the shaft part from the speedom" All vehicles can be retro fitted.
Renault Trafic T1100D 1995 1994 No speed pulse signal!
Renault Twingo 1996 1998 "In the engine compartment on the left hand side of the air filter is a white, 3 pin connector. The signal is at the centre pin." Green.
Renault Twingo 1993 Behind the speedometer in the white connector Pin 7. Green. Important: In the described harness there are two brown cables. Only one of them is the correct one.
Rolls Royce Silver Seraph "At the rear of the instrument cluster, there is a white connector. The red/yellow cable carries the signal." Red/yellow.
Rover 200 1996 Above the fuse box connector C239 / C47. Pin 16. White/orange.
Rover 200 Behind the instrument cluster on the White/Orange wire. White/Orange
Rover 200 series Behind the speedometer there is a grey 16 pin connector. Pin 1 carries the signal. Orange/white. Example given is for model 1997.
Rover 216 & 416 1990 1994 "The speed pulse signal is behind the instrument panel, at the speedometer, at pin 2 of a white, 8 pin connector." Yellow/red. This location for the Rover series 200 & 400 is only for cars with 1.6 Litre engines.
Rover 400 Behind instrument cluster on the Orange wire Orange
Rover 416 Si 1998 "At the driver side under the instrumenten panale is a grey, 22 pin connector. Pin 2 has the signal" Orange.
Rover 416 SI 1995 Above the fuse unit grey 20 pin connector Pin 13. Orange. Alternative: On the control panel on the left side. On the 10 pin connector Pin 2 (Orange).
Rover 420 Diesel 1996 Above the fuse box on the grey connector Pin 13. Orange.
Rover 600 1993 1996 "The speed pulse signal is at pin 6 of a white, 12 pin connector behind the instrument panel, at the speedometer." Orange.
Rover 600 1993 1996 "The speed pulse signal is at pin 6 of a white, 12 pin connector, behind the instrument panel, at the speedometer." Blue/white.
Rover 600 1993 On the control panel on the white 12 pin connector Pin 6. Blue/white.
Rover 75 1999 Behind the instrument cluster R.H. plug pin 6 White/Grey White/Grey
Rover 75 2.0 CDT 1999 Remove 2 screws above instrument cluster. Remove cover (clipsed 3 times). Remove another screw. Pull out instrument cluster. There is a 12 pin connector at the right backside. Pin 6 carries the signal. White/grey.
Rover 75 Diesel club 2001 behind the radio there is a 6way connector taped back into the loom. Within this connector there is a green/grey wire which contains the signal. The reversing wire is also located on the connector.
Rover 800 1993 In the legroom on the driver's side white 20 pin connector Pin 16. Black/red.
Rover 800 1991 1994 The speed pulse signal is at pin 20 of a white 20 pin connector. The connector is on the right hand side of the fuse box in the driver kickwell. Black/red.
Rover MG-2T Est 2002 "back of instrument panel, Black 12-way connector pin 6, Grey/White wire."
Rover MGF 1999 "There is no signal available. It is not allowed to take it from the ABS sensor. A hall generator from VDO has to be installed at the speedometer cable, in the engine compartment." -
Rover MGF 1999 "The speed signal can be found on the 24 pin connector on the fuse board, under the right hand side of the dash. Wire colour is White/Orange." White/Orange
Rover MGF 1996 1998 "Near the fusebox, there are 2 big connectors (No. 22812). One is between instrument-harness and main-harness. The Yellow/green. cable at this connector carries the signal." Yellow/green.
Rover MGF 1995 In the fuse box on the 20 pin white connector. Pink/blue.
Saab 900 1998 N/S Front kick panel connect to the Orange/White. Orange/White
Saab 900 1994 In the legroom on the driver's side. Orange/white.
Saab 900 1993 The speed pulse signal is in the wiring harness behind the connector for the anti-lock control unit. The control unit is on the left hand side of the windscreen washer reservoir. Orange/white.
Saab 900 Turbo cabriolet 1996 "Passenger side kickwell is five conector blocks, the top most conector pin 6 Orange/White." Orange/White
Saab 9000 1991 1997 "The speed pulse signal is at the black wire of a 2 pin black connector, located in the middle of the engine compartment, between the engine block and the bulkhead, at the wire from the gear box to the main wiring harness." Black.
Saab 9000 1984 1998 Right beside the steering rod on the 2 pin connector Pin 1. Black.
Saab 9-3 1998 "In the driver's footwell , left under the steering wheel, you can find 5 connectors. The fourth one from bottom has 33 pins. Pin 6 carries the signal." ? Don't try to take the signal from the cruise control because the signal is too weak.
Saab 9-3 1998 In the legroom on the driver's side on the 33 pin connector DXC 198 Pin 28.
Saab 95 2000 Can Bus use AES4.4 unit from sailes marketing.
Saab 95 1998 "Passaner footwell 43 pin connector, the speed signal is on pin 16."
Saab 95 At passengers footwell there is a grey 43 pin connector. Pin 16 carries the signal. OR: It can be a 58 pin connector too. Same cable colour but other pin no. Violet.
Saab 9-5 1997 In the legroom on the driver's side on the grey 43 pin connector Pin 16. Violet.
Saab all models 1997 1997 "All Saab vehicles are standard equiped with GAL at the radio. No ISO connector, but Sony-connector."
Saturn SL-1 Behind instrument cluster. To get to the cluster wires the top of the dash must be removed. There are two screws holding it down and the rest is just popped into place. Green.
Seat Alhambra 1995 On the radio ISO connector A Pin 1. Violet.
Seat Alhambra 1.9 1996 "Behind the instrument panel, at the speedometer is a red, 28 pin connector. The speed pulse signal is at pin 7." Purple. Pin number 7 is always the same but the cable colour can change.
Seat Arosa 1997 On the control panel on the 32 pin connector Pin 28. Blue/white.
Seat Cordoba 1993- On the control panel on the white 28 pin connector Pin7. Violet.
Seat Cordoba 1.6 5V 1993 1999 "Behind the instrument panel, at the speedometer is a white, 28 pin connector. The speed pulse is at pin 7." Purple. Pin number 7 is always the same but the cable colour can change.
Seat Ibiza 1994 Control panel at the white 28 pin connector Pin 27. White.
Seat Ibiza 1.9 TDi GT 1997 1999 "At the gearbox tere are 3 cables: White/Brown, Black and White/Blue. The signal is in the White/blue cable." White/blue.
Seat Ibiza GLX 1.6i 1993 1996 "The speed pulse signal is at the middle pin of a 3 pin connector, located in the engine compartment, on the right hand side, on the gear box." Blue/white.
Seat Inca 1996 "At the gearbox there is a connector with 3 cables: ground, +12 V and speedpulse signal with the colour white/blue." White/blue.
Seat Toledo 1992 1998 On the radio ISO connector A Pin 1. Violet.
Seat Toledo 2 199 On the radio ISO connector A Pin 1. Blue/white.
Seat Toledo Diesel 1.9 TDI 1999 "Radio connector, Chamber 3, pin 1." Blue/white.
Skoda Octavia 1997 On the radio ISO connector A Pin 1. Blue/white.
Skoda Octavia "1. At the Speedpulse generator, there is a 3 pin connector, T3j. Pin 2 (T3j/2) carries the signal, cable colour white/blue, 0.5mm diameter. (T3j/1 is +12V, colour black/white, T3j/3 is ground, colour brown). Location of generator is probably at the gearb" White/blue.
Smart Smart 1998 "There is no speedpulse. A hall generator can be installed at the right or left rear wheel. (VDO-Kienzle no. for generator only: 06004.010003). Installation kit to order at: Kienzle Rheinapp GmbH, Alexanderstr. 37-39, 45472 Mühlheim an der Ruhr, Germany, P" - "At the right or left rear wheel, opposite to the ABS sensor there is a hole. Pull through the threaded pin of the speedpulse sensor. Install the two washers on both ends of the hole. Use a screw-glue (important!), e.g. LOCTITE. The distance between th"
Ssang Yong Korando 1997 On the control panel on the 50 pin connector Pin 17.
Ssang Yong Korando 602E 1997 1998 Behind the instrument panel is a black 16 pin connector. Pin 1 has the signal. Yellow/white. Attention: At the instrument panel there are more cables with this colour but only one at this connector.
Ssang Yong Musso 1996 1998 "Behind the instrument panel, at the speedometer is a black, 16 pin connector, with the signal at pin 4." Yellow/white.
Ssang Yong Musso 1996 On the control panel on the black 16 pin connector. Pin 4. Yellow/white.
Ssang yung Korando 1998 "Behind instrument cluster on the blue connector, the speed signal is on the Yellow wire." Yellow
Subaru Forester 2002 "there is a green multiplug on the clocks, Pin 14 carries signal - Green/Orange wire"
Subaru Forester 1997 On the control panel on the 30 pin connector I 10. Pin 13. Green/black. ECU: Engine Control Unit.
Subaru Impreza 2000 "Remove the instrument cluster, and connect to the Green/Yellow wire with silver bands on the 18 pin connector." Green/Yellow with Silver bands
Subaru Impreza 1995 "On the ECU in the legroom, passenger's side pn the yellow 16 pin connector Pin 1." Green/black.
Subaru Impreza 2.0 GL 1995 1998 The engine control unit is located in the front passenger side kickwell under the footrest panel. The speed pulse signal can be found at the central yellow 16 pin connector at pin 1. Green/black.
Subaru Impreza Model 1997 1998 "At ECM, Connector B135, Pin 3 carries the signal. OR: At Speedometer, connector 110, Pin a2 carries the signal." Green/black.
Subaru Legacy 1998 Behind the instrument cluster there is a blue connector. There is a twin cable with black and white cores. The black cable carries the signal. Black.
Subaru Legacy 1997 1998 "At the ECM, in passenger's footwell , below the foot rest, there is a separate 14 pin connector. The black/green cable carries the signal." Green/black.
Subaru Legacy 1996 On the 20 pin connector Under the steering wheel cover. Green/black.
Subaru Legacy GX 1999 Remove the steering column cover (lower part only) and connect to the Green/Black on the 20 pin connector. Green/Black
Subaru Legacy GX 4WD 1994 1996 "The engine control unit is located in the front passenger side kickwell under the footrest panel. The speed pulse signal is at pin 1 of the central, yellow, 16 pin connector." Green/black. If an ISO radio connector is fitted please use pin 1 in chamber 3.
Subaru Legacy GX Kombi 1999 Above the fuse unit on the white connector. Green/black.
Subaru Legacy Outback At the rear of the instrument cluster there are 3 connectors. The green/black cable of the left connector carries the signal. Green/black.
Subaru SVX 1997 On the ECU on the yellow 12 pin connector B 60 Pin 11.
Suzuki Baleno 1994 On the control panel on the 16 pin connector K Pin 4. Violet/yellow.
Suzuki Baleno SE 1998 "Behind instrument cluster, pin 13 Violet/Yellow" Violet/Yellow
Suzuki Baleno Wagon GLX 1995 1997 On the left hand side behind the glove box at the engine control unit there are three grey connectors. The signal is at pin 1 of the uppermost grey 12 pin connector. Violet.
Suzuki Grand Vitara V6 2.01 1998 "On the engine control unit in the legroom on the passenger, side green connector B Pin 5." Yellow. Important: Speed signal alternative: On the control panel on the middle connector Cable colour: blue/yellow.
Suzuki Jimny 1998 On the ECU on the 22 pin connector C Pin 2. Yellow.
Suzuki Jimny 1998 The speed pulse can be found at the instrument panel or an easier location is at the center console near the handbrake. The wiring harness near this location carries the speed signal from the gearbox to the instrument panel. The colour of the wire is Yell Yellow/green.
Suzuki Liana 2001 "Behind Left hand kick panel, there is a multi pin connector within which there is a purple wire with silver bands. The speed signal is on this wire." Purple with silver bands
Suzuki Swift 1.0 GL 1996 In the driver side kick well there is an engine control unit. The signal is at the grey 22 pin connector at pin 10 for automatic transmission and at pin 1 for manual transmission. Violet or pink. "For automatic transmission the cable colour is violet, for manual transmission the colour is pink."
Suzuki Vitara 16V 1996 "At the driver side door post there are two control units. The rearmost unit is the engine control unit. The yellow, 22 pin connector has the signal at pin 7." Yellow.
Suzuki "Vitara 2,01 Diesel" 1998 On the driver's side in the legroom on the control unit on the yellow connector Pin 8. Yellow/silver.
Suzuki Vitara 2.0 - 16V 1997 "Low down, in the driver's side there is a controller unit with 4 connectors. Connector B carries the signal at pin 4." Yellow/silver.
Suzuki Wagon R+ 1997 On the ECU on the 22 pin connector C Pin 16. Violet.
Toyota 4-Runner 1995 Behind the instrument cluster. Green/blue.
Toyota 4-Runner 1992 1996 "In the engine compartment on the bumper (passenger side), there is a black 8 pin connector. The signal is at pin 2." Green/red.
Toyota 4-Runner 1990 1996 On the control panel on the 8 pin connector Pin 6. Green/blue.
Toyota Avensis 1998 Behind the control panel on the black connector C 10 Pin 15. Yellow/blue.
Toyota Avensis 1998 Black connector at the rear of the instrument cluster Pin 5 is the input signal. Wire colour may and will vary Blue "Pin 18 is the output signal but would require a pull up to 5 Volts
This information is from VDO in Germany and applies to all current models (LHD and RHD) in the Avensis range. 24/05/02
Verified on a 1.8 Petrol"
Toyota Avensis 1.6 1998 "At the front passanger side, behind the glove box is the engine control unit. At pin 9 of the white, 22 pin connector is the signal." Green.
Toyota Camry LE 1994 Behind the instrument cluster. Purple/white.
Toyota Camry V6GX 1991 1996 The signal can be found at the engine control unit behind the glove box in the dark grey 22 pin connector at either pin 8 or pin 9 or at pin 11 of the dark grey 26 pin connector. The connector and pin number depends on engine specification. Violet/yellow.
Toyota Carina E 1991 1995 "Below the glove box, and behind the black cover there is a brown 20 pin connector which has the signal at pin 8." Green or red. "The cable colour in this series can vary - green, red or white/blue."
Toyota Carina E 1997 Behind the radio on the control panel on the black connector C 10 Pin 15. Green/blue.
Toyota Celica 1995 Behind the instrument cluster. Grey.
Toyota Celica 1991 "In the centre console on the middle, white 19 pin connector Pi n10." Blue.
Toyota Celica 1991 1996 "Within the centre console close to the gear lever, three connectors are located one upon the other. The white 19 pin connector in the middle has the signal at pin 10." Blue.
Toyota Celica 2.0 GTI 1990 1994 Within the centre console close to the gear lever three connectors are stacked together. The white 19 pin connector in the middle has the signal at pin 10. Blue.
Toyota Corolla 1997 In the radio slot on the blue 22 pin connector Green.
Toyota Corolla 1992 1997 "Within the centre console the engine control unit is mounted on the transmission tunnel. Depending on the engine control unit fitted, the signal is located at pin 11 or pin 13 of the dark grey 16 pin connector." Violet/white.
Toyota Corolla 1.4 1997 "In the engine compartment there is a hall generator in the speedometer cable. There are 3 cables, one is ground, one is +12V, & one is the signal. OR: behind the instrument cluster there are 4 connectors. The blue, 13 pin connector (C11) carries the signa" see description
Toyota Hi Ace 1996 There is no speedpulse signal. A hall generator from VDO has to be installed at the speedometer cable. -
Toyota Land Cruiser 1998 There is a 22pin connector behind the glovebox. Pin14 carries the signal. Green/red with blue circle.
Toyota Land Cruiser 1996 "For all engine types the location for the engine control unit is behind the glove box. The cable colour is always the same. For engine type 5VZ-FE, the signal is at pin 12 of a 28 pin connector. For engine type 3RZ-FE, the signal is at pin 8 of a 22 pin c" Violet/white.
Toyota Land Cruiser 1996 Behind the glove compartment on the right connector Of the ECU. Pink/white.
Toyota Land Cruiser 1996 Behind the glove compartment on the right connector of the ECU. Cable colour is Pink/White. Pink/White
Toyota Land Cruiser 1994 Behind the instrument panel. Red/green.
Toyota Land Cruiser 4.2 Turbo Diesel 1997 The speed pulse is at the Emission Control module on the passenger side (right hand drive vehicle!) behind the speaker. It has a 26 and 16 pin connector. In the 16 way connector at pin 13 there is a Black/orange wire which carries the speed pulse. Black/orange.
Toyota Land Cruiser Amazon "The speed Pulse is below the steering column at a Silver control module. The signal is at the black 22 way connector at
pin 4, the colour is red with blue rings." Red with blue rings.
Toyota Land Cruiser Amazon 1999 1999 "The speed pulse is at the ECU at the 22 pin grey connector, Cable colour violet. OR: Behind glovebox at a white connector pin7 or 8 carries the signal the colour wire is green/red."
Toyota Land Cruiser Colorado 1997 "Behind the instrument cluster on the blue plug, pin 6 wire colour is Blue/Red" Blue/Red
Toyota Land Cruiser HDJ 100 1998 "Behind the glovebox there are 4 different connectors. A 12 pin, 16 pin, 28 pin and a 22 pin connector. The 22 pin connector carries the signal at pin 9." Purple with blue rings.
Toyota Land Cruiser HDJ 80 1995 1998 Behind the speedometer there is a grey connector. The Black/red. cable carries the signal. Black/red. Turbo Diesel.
Toyota Land Cruiser Station 1995 1998 The engine control unit is located behind the dashboard cover between the glove box and the left door post in all models. The signal is available at pin 8 of the grey 22 pin connector. Blue/white.
Toyota Land Cruiser Station 1995 1998 The engine control unit is located behind the dashboard cover between the glove box and the left door post in all models. The signal is available at pin 8 of the grey 22 pin connector. Brown/orange.
Toyota Land Cruiser Station 1992 1995 "The engine control unit is located behind the dashboard cover, between the glove box and the left door post in all models. The signal is available at pin 8 of the grey 22 pin connector." Brown/red.
Toyota Landcruiser Colorado 2001 Located at the gearbox sender. Red / Blue
Toyota MR2 1998 "On the ECU (Far wall inside boot)- R.H. 10 pin connector, pin 2 Violet/White." Violet/White
Toyota Paseo 1996 1999 "Behind the glove box is an engine control unit with a grey, 16 pin connector. The signal is at pin 13." Yellow.
Toyota Picnic 1997 Behind the glove box at the engine control unit is a white 22 pin connector. Pin 9 has the signal. Violet. Attention: At this connector are two cables with the same colour.
Toyota Picnic 1996 Behind the control panel on the blue connector A Pin 9. Pink/white.
Toyota Previa 1994 Under the driver's seat the dark grey connector to the engine control unit has the signal at pin 9. Violet/white.
Toyota Previa 1990 Behind the instrument cluster. Purple/white. It is not to recommended to disconnect the connector behind the instrument panel while the battery is still connected. This causes the airbag light to come on.
Toyota Previa 1990 On the ECU beside the driver's seat on the 22 pin connector Pin 9. Violet/white.
Toyota RAV 4 1994 1995 "The signal is located at pin 9 of a dark grey 22 pin connector to the engine control unit, which is mounted within the centre console on the transmission tunnel." Violet/white.
Toyota RAV 4 1994 In the consol on the engine control unit on the grey 22 pin connector Pin 9. Violet/white.
Toyota RAV 4 Mod.96 1996 At the ECU in the center console. violet/white
Toyota Supra 1993 1996 "On the front passenger side in the kickwell, under the footrest panel, is an orange 38 pin connector, with the signal at pin 2." Blue/red.
Toyota Supra 1991 In the legroom on the passenger's side on the orange 38 pin connector Pi n2. Blue/red.
Toyota T-100 1995 Behind the instrument cluster. OR: ECU located in the passenger kick panel. Green.
Vauxhall Agila 2000 Behind the Radio on the power connector pin No.5 the wire colouris Violet. You must use the SPU1 unit from sailes Marketing with all the switches in the on position and using the 1:1 Ratio. Violet
Vauxhall Astra 1991 1996 "The speed pulse signal is at the engine control unit connector, in the passenger front kickwell, under the glove box, at the left hand door post." Blue/red. If a radio connector is available please use the blue/red wire. The cable colour of all models from this manufacturer is blue/red. A second location is at the connector board under the engine control unit. Pay attention to the cable colour. For cars wi
Vauxhall Astra - G 1.6 16V 1998 At the driver side behind the speedometer is a 36 pin connector. Pin 10 has the signal. Blue/red. If a radio connector is available use the blue/red wire. The cable colour of all models from this manufacturer is blue/red. A second location is at the connector board under the engine control unit. Pay attention to the cable colour.
Vauxhall Astra 3 1991 1998 On the radio ISO connector A Pin 1. Blue/red.
Vauxhall Astra Caravan 1991 1993 "The speed pulse signal is at the engine control unit connector, in the passenger front kickwell, under the glove box, at the left hand door post." Blue/red. If a radio connector is available please use the blue/red wire. The cable colour of all models from this manufacturer is blue/red. A second location is at the connector board under the engine control unit. Pay attention to the cable colour. For cars wi
Vauxhall Calibra 1990 1997 Behind the control panel on the 16 pin connector Pin 3 Blue/red.
Vauxhall Combo 1993 "On the ECU in the legroom, on the passenger's side." Blue/red.
Vauxhall Combo 1.4i 1993 "The speed pulse signal is at the engine control unit connector, under the glove box at the door post. The pin position can vary. Pay attention to the cable colour." Blue/red. If a radio connector is available use the blue/red wire. The cable colour of all models from this manufacturer is blue/red. A second location is at the connector board under the engine control unit. Pay attention to the cable colour.
Vauxhall Corsa 1993 1997 "The speed pulse signal is at the engine control unit connector in the front passenger kickwell, at the left door post under the glove box." Blue/red. If a radio connector is available use the blue/red wire. The cable colour of all models from this manufacturer is blue/red. A second location is at the connector board under the engine control unit. Pay attention to the cable colour.
Vauxhall Corsa 1993 1997 "The speed pulse signal is at the engine control unit connector in the passenger side kickwell by the door post, under the glove box." Blue/red. If a radio connector is available use the blue/red wire. The cable colour of all models from this manufacturer is blue/red. A second location is at the connector board under the engine control unit. Pay attention to the cable colour.
Vauxhall Corsa B 1993 On the radio ISO connector A Pin 1. Blue/red.
Vauxhall Frontera 2 1998 On the radio ISO connector A Pin 1. Blue/Grey.
Vauxhall Frontera 2.2 16V 1998 "ISO radio connector, chamber 3 pin 1." Blue/yellow.
Vauxhall Frontera 2.2 Dti 1998 "Behind the speedometer, cable colour black/violet. OR: At the gear box, at the hall generator, cable colour brown/yellow." Black/violet OR brown/yellow.
Vauxhall Monterey 1998 "Area of ""A""-post, driver's side." Bright-green/white Caution: There are several green/white cables in this area.
Vauxhall Monterey 3.1l Tdiesel UBS 1992 On the control panel; connector On the right Pin 8. Light-green/white.
Vauxhall Monterey Diesel The speed pulse wire comes from pin 16 of the Diesel control unit under the bonnet to the instrument cluster. The wire is White/black at pin 7 of connector C2. White/black.
Vauxhall Movano 1999 Behind the instrument cluster. Follow printed circuit from the screw marked SP to the wiring connector.
Vauxhall Movano 2.5 dti 2002 Green wire at Pin 20 of Grey 26 way connector at the rear of the instrument cluster "5,000 imp / Km"
Vauxhall Omega 2000 Speed signal can not be found on the rear of the audio. Speed signal is in the passenger kick panel. On the connector block with blue cover. Bottom side of connector RH side Blue/Red. DO NOT UNPLUG BLUE CONNECTOR! Blue/Red
Vauxhall Omega B 1994 1997 "The speed pulse signal is at pin 6 of a black, 64 pin connector in the kickwell on the driver side, at the right door post." Blue/red. If a radio connector is available please use the blue/red wire. The cable colour of all models from this manufacturer is always blue/red. For old Omega models a hall generator can be obtained. Order number is: 36250-1236270.
Vauxhall Omega Limousine 1994 On the radio ISO connector A Pin 1. Blue/red.
Vauxhall Sintra 1999 "Vehicles with preinstalled radio: blue/red cable at the radio connector. Other vehicles: remove the radio blanking plate, there you can find the harness with the blue/red cable." Blue/red.
Vauxhall Sintra 1996 On the radio ISO connector A Pin 1. Green.
Vauxhall Tigra 1994 1998 "The speed pulse signal is at engine control unit connector in the kickwell at the door post, under the glove box." Blue/red. If a radio connector is available use the blue/red wire. The cable colour of all models from this manufacturer is blue/red. A second location is at the connector board under the engine control unit. Pay attention to the cable colour.
Vauxhall Tigra 1994 "On the ECU in the legroom, passenger's side." Blue/red.
Vauxhall Vectra 1995 1998 "The speed pulse signal is at pin 29 of a blue, 43 pin connector in the driver kickwell at the door post." Blue/red. If a radio connector is available use the blue/red wire. The cable colour of all models from this manufacturer is blue/red.
Vauxhall Vectra (B) Caravan Dti 1999 "ISO radio connector, chamber 3 pin 1." Blue/red. All vehicles have a preinstalled radio connector.
Vauxhall Vectra B 1995 On the radio ISO connector A Pin 1. Blue /red.
Vauxhall Zafira 1999 On the radio ISO connector A Pin 1. Blue/red. Important: connector 30: permanent power. connector R: switched power.
VDO Kienzle Tachograph 1310 "Light Blue on the connector market ""Km/h MPH"" on Pin 4."
VDO Kienzle Tachograph 1314 Plug C pin 3 is the output signal pin. "The Light Blue on the connector market ""Km/h MPH"" on Pin 4 must not be used as this would break tachograph regulations."
VDO Kienzle Tachograph 1315 "The speed signal is on the smaller of the two connectors, which is the Z connector. The signal is on pin 4."
VDO Kienzle Tachograph 1318 "The speed signal is on the yellow B Connector, at pin 7 or the brown D connector at pin 3."
VDO Kienzle Tachograph 1319 The speed signal is on the yellow connector at pin B7 or D3.
VDO Kienzle Tachograph 1324 1999 "Distance output from the 1324 tachograph terminal B6 or B7
B8 provides a 4 impulses per metre output."
VDO MTCO 1324
Volkswagen Bora 1998 On the radio ISO connector A Pin 1. Blue/white. "Important: If the speed signal is not available on the radio, it can be connected on the fuse unit (blue/white)."
Volkswagen Caravelle 1995 Behind the fuse box is a 1 pole connector cable colour is Blue/White Blue/White Signal may also be on the back of the radio in pin 1 of the ISO connector cable colour Blue/White.
Volkswagen Caravelle Transporte 1993 1995 "The connection place is on or behind the fuse box, the colour of the connector can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box." Blue/white. If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white.
Volkswagen Corrado 1991 1995 On the radio ISO connector A Pin 1. Blue/white. "Important: If the speed signal is not available on the radio, it can be connected on the fuse unit (blue/white)."
Volkswagen Golf 1997 On the ISO connector A Pin 1. Blue/white or pink. "Important: If the speed signal is not available on the radio, it can be connected on the fuse unit (blue/white)."
Volkswagen Golf 1992 1997 "The connection place is on or behind the fuse box, the colour of the connector (G1/11) can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box. Some models of this series 1 HXO have a connection at " Blue/white. " If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is always blue/white. If there is no signal, please look behind the speedometer for a white cable."
Volkswagen Golf 1992 1997 "The connection place is on or behind the fuse box, the colour of the connector (G1/11) can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box. Some models of this series 1 HXO have a connection at " Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white. If there is no signal, look behind the speedometer for a white cable."
Volkswagen Golf 1992 1997 On the radio ISO connector A Pin 1. Blue/white. "Important: If the speed signal is not available on the radio, it can be connected on the fuse unit (blue/white)."
Volkswagen Golf Cabrio 1995 Cruise control computer high in the driver's kick panel #5ga 004 397-11 and 1ho 907 305 blue/white
Volkswagen Golf Cabriolet 1997 "The connection place is on or behind the fuse box, the colour of the connector can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box. Some models of this series 1 HXO have a connection at the left" Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white. If there is no signal, look behind the speedometer for a white cable."
Volkswagen Golf CL 1992 1997 "The connection place is on or behind the fuse box, the colour of the connector (G1/11) can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box. Some models of this series 1 HXO have a connection at " Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is always blue/white. If there is no signal, please look behind the speedometer for a white cable."
Volkswagen Golf GTD 1992 1997 "The connection place is on or behind the fuse box, the colour of the connector (G1/11) can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box. Some models of this series 1 HXO have a connection at " Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white. If there is no signal, look behind the speedometer for a white cable."
Volkswagen Golf IV - export 1997 In the back of the speedometer there is a green 32 pin connector. Pin 28 carries the signal. green
Volkswagen "Golf IV, 1.4 16V" 1997 "At radio connector (ISO), Pin 1 in chamber 3 carries the signal. OR: At Backside of instrument cluster, left side (facing the engine), blue/white cable." blue/white All vehicles are equipped with this cable even when no radio is installed.
Volkswagen Golf Syncro Diesel 1997 1998 "The connection place is on or behind the fuse box, the colour of the connector can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box. Some models of this series 1 HXOhave a connection at the left " Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white. If there is no signal, look behind the speedometer for a white cable."
Volkswagen Golf Variant 1992 1996 "The connection place is on or behind the fuse box, the colour of the connector (G1/11) can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box. Some models of this series 1 HXO have a connection at " Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white. If there is no signal, look behind the speedometer for a white cable."
Volkswagen Golf Variant 1992 1996 "The connection place is on or behind the fuse box, the colour of the connector (G1/11) can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box. Some models of this series 1 HXO have a connection at " Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white. If there is no signal, look behind the speedometer for a white cable."
Volkswagen LT 28 1995 On the control panel on the black 12 pin connector Pin 2. White.
Volkswagen LT35 Mod. 1996 1996 "At the speedometer there is a 12 pin connector. Pin 11, cable colour brown or pin 2 colour white carry the signal. A blue/black cable at the speedometer is also possible." "Vehicles with tachograph have a cable with 4 wires with the colours: brown, blue, black and ???. One of these cables carries the signal. There is a special hall generator at the gear box. There is a generator for retro fitting: Order Nr. 251 919 149."
Volkswagen Lupo 1998 Behind the fuse box. Blue/white. Important: Speed signal alternative: on the control panel on the 32 pin connector Pin 28 (white/blue).
Volkswagen Lupo 1998 "Remove the 2 screws above the 2 instruments (speedometer and odometer). Remove cover. Then remove further 6 screws. At the rear of the instrument cluster, on the left hand side (facing the engine) there is a blue 32 pin connector. Pin 28 carries the signa" white/blue If radio connector (ISO) is available please use Pin 1 in chamber 3.
Volkswagen Multivan T 4 1991 On the radio ISO connector A Pin 1. Blue/white. Important: Speed signal alternative: in the fuse box on the orange connector Pin 9. Cable colour: blue/white.
Volkswagen New Beetle 1999 On the ISO connector A Pin 1. Blue/white.
Volkswagen New Beetle import model 1998 Behind the instrument cluster there is a blue connector. The green cable carries the signal. green
Volkswagen Passat 1997 "At the driver side, in the engine compartment , under the windscreen is a black box. Inside the black box is a control unit and some connecting plugs. The outer, 10 pin plug has the signal at pin 3." White/blue. If radio connector (ISO) is available please use Pin 1 in chamber 3.
Volkswagen Passat 5V Turbo 1996 The speed pulse signal is at pin 1 in chamber 3 of the ISO radio connector in the centre console. White/blue.
Volkswagen Passat CL 1992 1996 "The connection place is on or behind the fuse box, the colour of the connector can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box." Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white. If there is no signal, look behind the speedometer for a white cable."
Volkswagen Passat Kombi 1997 On the right beside the voltage connector There is a 1 pin connector. Pict 2. White/blue. Important: Speed signal connection alternative: radio ISO connector A Pin 1 (white/blue). Light connection alternative: on the backlight (grey/black).
Volkswagen Passat Mod.95 1995 "Back of fuse box in the right blue plug, right row all the way in the back." white The two blue plugs are sitting side by side on the back of the fuse box. All the wires in these blue plugs are white.
Volkswagen Passat Mod.97 Export 1997 There is a black 10 pin connector (T10b) at the protection housing on the left hand side in the engine compartment. brown/red
Volkswagen Passat Tdi 1997 Behind the instrument panel on the left is a blue connector. The brown/red cable has the speed-pulse signal. Brown/red. If radio connector (ISO) is available please use Pin 1 in chamber 3.
Volkswagen Passat Variant 1997 Remove cover on the left of dashboard then remove cover under steering wheel column. There is a blue 32 pin connector at the rear of the instrument cluster. Pin 3 carries the signal. white/blue "If radio connector (ISO) is available please use Pin 1 in chamber 3. Caution: Don't switch on ignition when the blue connector is pulled off. The airbag symbol will appear, and a reset by a VW-dealer will be necessary."
Volkswagen Passat Variant 1992 1996 "The connection place is on or behind the fuse box, the colour of the connector can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box." Blue/white. If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white.
Volkswagen Polo 1994 On the radio ISO connector A Pin 1. Pink. "Important: If the speed signal is not available on the radio, it can be connected on the speed sensor. (Blue/white)."
Volkswagen Polo III 1994 "At the fusebox there is a white connector G1. Pin 11 carries the signal. OR: Diesel engine cars, there is a Hall generator at the gearbox with 3 cables: Black, Brown/Green and White/Blue. The white/Blue cable carries the signal." blue/white
Volkswagen Sharan 1999 "Rear of radion on pin 1 of ISO connector, cable colour is RED" Red
Volkswagen Sharan 1998 "Behind the instrument cluster, pin 27 on the red connector cable colour White/Green" White/Green
Volkswagen Sharan 1998 "Behind the controler of the aircondition, there is a red connector. Pin 7 carries the signal." white
Volkswagen Sharan 1995 On the radio connector A Pin 1. Blue/white or red. "Important: In this vehicle, various cable colours are used for the gala signal. Alternatives: Violet also to the radio connector 1 Pin 5. Blue/white in the fuse box."
Volkswagen Sharan 1995 1997 "The connection place is on or behind the fuse box, the colour of the connector can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box." Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3, the cable colour is violet. The cable colour of all models from this manufacturer is blue/white."
Volkswagen Sharan Tdi 1997 At the rear of the instrument cluster there is a red connector. Pin 7 carries the signal. purple "OR: 8 pin connector at the radio, pin no. 5, cable colour red. (described as T8h/5)."
Volkswagen Transporter 1996 "The connection place is on or behind the fuse box, the colour of the connector can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box." Blue/white. If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white.
Volkswagen Transporter + Bus T4 Vehicles without speed pulse signal can be refitted with a hall generator at the speedometer. VW No. 357 907 345A
Volkswagen Vento 1992 1998 "The connection place is on or behind the fuse box, the colour of the connector (G1/11) can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box. Some models of this series 1 HXO have a connection at " Blue/white. "If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white. If there is no signal, look behind the speedometer for a white cable."
Volkswagen Wohnmobil 1997 "The connection place is on or behind the fuse box, the colour of the connector can vary. If there is no distribution of the signal, there is a wire within a blue connector above the fuse box." Blue/white. If radio connector (ISO) is available please use pin 1 in chamber 3. The cable colour of all models from this manufacturer is blue/white.
Volvo 440 1994 On the control panel on the grey connector C 2 Pin 6. Green. Important: Only at high level outfit.
Volvo 440 1989 1991 "Behind the instrument cluster there is an 18 pin connector c21Bl. Pin 9 carries the signal, it should be rectangular. This pin is not connected. (The 18 Pin-connector c20Y, carries the signal too at pin 6, cable colour yellow/brown, but this signal is sin"
Volvo 480 1995 Behind the control panel on the grey connector C 20. Green. Important: Speed signal alternative: connector C 22 grey/green.
Volvo 850 1992 1996 On the multiconnector In the legroom on the driver's side on the Pos. C yellow 18 pin connector Pin 1. Yellow/brown. Important: Speed signal alternative: even on this Pos C Pin 3.
Volvo "850 2,5L" 1993 1994 "There are two locations: 1. on the driver side, in the kickwell at the left of the steering column, there are three, coloured distribution connectors. The signal is at pin 38 of the red, 49 pin connector. 2. On the left of the steering column ther" Yellow/black.
Volvo 850 2.0-10V 1993 1997 "There are two locations: 1. on the driver side, in the kickwell at the left of the steering column, there are three, coloured distribution connectors. The signal is at pin 38 of the red, 49 pin connector. 2. On the left of the steering column ther" Yellow/black.
Volvo 850GLT Under the dash to the left of the steering column. yellow/black
Volvo 940 1991 1996 "Behind the instrument panel, directly at the speedometer, there is a bright, brass coloured, U-shaped connector with the signal. It is possible that a cable is connected here." Orange/green or grey/orange.
Volvo 940 2 pin connector at the instrument cluster purple/white or green/orange The instrument cluster is very easy to access. With the use of a flat blade screw driver in the access holes of the trim ring the spring tab can be pushed in and the trim panel will come out.
Volvo 940 GL 1998 Behind the control panel on the 4 pin connector Pin1. White/green.
Volvo 960 1994 1996 "The engine control unit is located in the kickwell, on the driver side, under the steering wheel panel, on the side to the driver door. The signal is at pin 12 of the white, 38 pin connector." Green/orange.
Volvo 960 1996 In the legroom on the driver's side on the white 38 pin connector Pin 12. Green/orange.
Volvo FH12 LKW "Behind the speedometer there are several connectors, marked with A, B,etc. Pin 6 at connector C carries a Kienzle-like signal. The connector is maybe not connected." "The Volvo-specific signal is at connector B, pin 7."
Volvo S 80 1998 On the control panel on the connector A Pin 5. Green/white. Important: This vehicle has since 05/99 CAN - Bus system.
Volvo S 90 1996 1998 There is a blue 13 pin connector adjacent to the steering column in the kick well. Pin 5 has the signal. Green/orange.
Volvo S40 1998 Remove the left hand side of the centre console side cover. And connect to the Yellow/Red on the 22 pin connector. Yellow/Red
Volvo S60 2002 "There is a blank terminal in the central electronic module (CEM) with four connectors above the gas pedal, D10 is empty this is used for the speed signal."
Volvo S80 1999 "Remove cover between pedals and dashboard. On the left hand side, under the steering column, there is a relay box. Pull it towards you and then down. There is a big 88 pin connector. Loosen the hexagonal bolt. Pull out the connector. It is divided in 4 se" -- "This car is equipped with a BUS system, but the engineers left us the chance to get the speed pulse...(originally the intention was for taxis)."
Volvo S90 2001 "At the rear of then instrument cluster, there is a brass U-shaped terminal connector. One terminal has a Green/Orange wire on it, the other terminal is spare. Connect to this terminal for the road speed signal." Green/Orange
volvo Suburban 1998 At the radio connector Dark green/white.
Volvo Turbo 460 1991 1993 No speed pulse signal!
Volvo V40 2001 "back of instrument panel, Blue/White wire."
Volvo V40 1999 Behind the instrument cluster there is a connector in the instrument cluster. 2 harnesses unite into 1 harness. The blue/red cable carries the signal. blue/red To remove the instrument cluster loosen the steering wheel column.
Volvo V40 S40 1996 On the passenger's side in the legroom on the white 22 pin connector Yellow/red.
Volvo V40 1.8i-16V 1996 1999 "In the centre console, behind the girder is a white 26 pin connector. The signal is at pin 3." Yellow/red.
Volvo V70 1996 1999 "There is a yellow distribution box with five connectors adjacent to the steering column. The signal is at pin 3 of the middle, yellow, 18 pin connector." Yellow/black. Attention: There is more than one yellow/black cable. Please look at the connection place.
Volvo V70 S70 1997 In the radio slot on the 10 pin connector Pin 7. Yellow/black.
Volvo V70 Mod. 1998 1998 Yellow/black cable at radio connector. yellow/black
Volvo V90 S90 1998 On the control panel on the 14 pin connector A Pin 13. Red/white.